Starting The Engine - Toro 20372 Operator's Manual

Starting the Engine

You can start the engine using either the electric-start button (if equipped) or the recoil-start handle.
Starting the Engine Using the Electric-Start Button
For Electric-Start Models
1. Hold the blade-control bar against the handle (A of
Note:
If the electric-start button has been removed, insert it in the electric starter (B of
2. Push the electric-start button until the engine starts (C of
Note:
If the machine does not start after several attempts, contact an Authorized Service Dealer.
Starting the Engine Using the Recoil-Start Handle
1. Hold the blade-control bar against the handle
2. Pull the recoil-start handle
Note:
When you pull the recoil-start handle, pull it lightly until you feel resistance, then pull it sharply
(Figure 15). Allow the rope to return to the handle slowly.
Note:
If the machine does not start after several attempts, contact an Authorized Service Dealer.
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (Figure 16).
Figure 14
(Figure
(Figure 15).
Figure 15
14
Figure 14).
Figure 14).
15).
Figure 14).
g239637
g233422