Divus KNX SUPERIO Quick Start Manual page 10

3 IN THREE STEPS TO A VISUALIZATION
ETS PROJECT
The start point for the creation of the KNX
visualisation with DIVUS OPTIMA is your ETS
project.
Using the OPC export in ETS can be created
a project file that contains all the information
needed from DIVUS OPTIMA.
ETS IMPORT
In the configuration area of DIVUS OPTIMA
under "TECHNOLOGIES - KNX – ETS IMPORT",
you can find a wizard, which will guide you
through the ETS-Import.
Select the project file created in step 1 and
follow the steps on the screen.
VISUALIZATION
After the import and the configuration of the
KNX functions, you can start to create the
visualisation. For this you can create several
rooms in the configuration area under "VISUA-
LISATION – ROOMS".
To equip the new created rooms with KNX ob-
jects, you can search them using the search
engine and drag&drop the whished objects
into the corresponding tables of the whished
rooms.
Detailed information about the programming/
usage of DIVUS OPTIMA can be found in the
OPTIMA ADMINSTRATOR-MANUAL/OPTIMA
USER-MANUAL
10