Typical Speaker Layouts - Yamaha RXA670 Owner's Manual

Typical speaker layouts

n
5.1.2-channel system (using presence speakers)
This speaker system uses the presence speakers to produce a natural 3-dimensional
sound field, and also creates Virtual Surround Back Speaker (VSBS) using the
surround speakers to add a sense of depth to the rear sound field. This system is
suited for enjoying not only 5.1-channel but also for 7.1-channel contents.
0.5 to 1 m
E
(1.6 to 3.3 ft)
1
1.8 m (5.9 ft)
9
4
101 to 301
Speaker type Abbr.
1/2 Produce front left/right channel sounds (stereo sounds).
Front (L/R)
Produces center channel sounds (such as movie dialogue
3
Center
and vocals).
4/5 Produce surround left/right channel sounds.
Surround (L/R)
Produce CINEMA DSP effect sounds or heights channel
E/R
Presence (L/R)
sounds of Dolby Atmos and DTS:X contents.
Produces LFE (low-frequency effect) channel sounds and
reinforces the bass parts of other channels. This channel
9
Subwoofer is counted as "0.1". You can connect two subwoofers to
the unit and place them on the left/right (or front/rear)
sides of the room.
0.5 to 1 m
R
(1.6 to 3.3 ft)
2
1.8 m (5.9 ft)
3 9
5
101 to 301
Function
Note
▪ . . -channel denotes standard . -channel plus for overhead speaker channels . For details on how
to place overhead speakers presence speakers , see Presence speaker layout p.
▪ To have a full effect of Dolby Atmos contents, we recommend using this speaker system. However, you
can also play back Dolby Atmos contents with the . system using surround back speakers .
▪ To have a full effect of DTS:X contents, we recommend using this speaker system.
▪ You can connect two subwoofers with built-in amplifier to the unit. Two subwoofers connected to the unit
output the same sounds.
▪ When using only one subwoofer, you can place it either in the left or right side.
17
En
.