Page 2
Table of Contents Table of Contents ............................. 1 Overview ..............................1 Product Features ..................................1 Safety Instructions ..................................2 Getting Started ............................3 Main Control Unit’s Front Panel ..............................3 Main Control Unit’s Rear Panel ..............................4 Operation & Setting ..........................5 Main Manu ....................................
Page 3
Dome Mode ....................................14 Video Override ..................................15 Go Home Perset ..................................15 Set Preset ....................................16...
Overview Product Features Matrix Coding: With digital matrix coding technique, you can set the ID of each microphone. The ID can also be changed randomly at any time. Web Page Control: With TCP/IP protocol control, you can use computers or mobile devices to set/change the settings of the main control unit via Internet.
Safety Instructions 1. Please read the instruction manual carefully before installing and using the apparatus. 2. Please save the instruction manual well for reference. 3. Please follow the instructions and aware of warning indications. 4. Except your dealer, please do not use any spare part recommended by others. 5.
Getting Started Main Control Unit’s Front Panel 1. Power: Long press to turn on/off 128*64 graphical LCD screen: Chinese, English and numbers are supported. It can save up to 64 graphs. Menu setting control (UP): This is for selecting the upper items listed in the setting menu. Menu setting control (LIFT): This is for selecting/setting the left items listed in the setting menu.
Main Control Unit’s Rear Panel 1. Power socket: 12-24V DC RS-232 Port (3P/3.5mm separate terminal: 2/TX, 3/RX, 5/G): for conference graphical control software RJ-45 Port (10 Mbps Ether Net): wired or wireless network for conference setting USB Port (Type A): audio recording and playing of PC and main control unit RS-485 Port (2P/3.5mm separate terminal: D+, D-): for connecting and controlling BXB’s high-speed dome camera.
Operation & Setting Main Manu Illustration of System’s Function Talking Mic Press Enter to display the ID of the talking microphone. Press Enter again to turn off the selected talking microphone. If all microphones are off, the screen will show “NO MIC”. Chairman microphone ID: *01 -*10 Delegate microphone ID: 001 - 999 Mode...
There are 4 different modes: Normal:Under certain Open Mic Qty, delegates can randomly speak and stop talking. Chairman Mode, Override, and FIFO cannot function in this mode. Override:Under certain Open Mic Qty, delegates take turn speaking. For example, if Open Mic Qty is one, it presents that only one delegate microphone can be turned on.
Speed Dome Set Dome Mode Press Left/Right to select a mode. There are three dome modes: Off: Not operating image tracking Button: Camera tracks the image when a speaker presses “TALK” button on the microphone. If more than one speakers press “TALK”...
Set Preset Microphone ID: Delegate microphone: 001-999 Chairman microphone: *01-*10 Camera ID: One main control unit is able to control 16 cameras. 01-16 represents the ID of the 16 cameras. Preset point: Each BXB’s high speed dome camera possesses 128 preset points. When the LCD screen shows ID number 001, it indicates the first preset point of the camera.
Voice Set Press Left/Right to select the further items below: AGC Mode: choose On or Off for microphone’s AGC function. When it is on, all microphones’ volume and sound quality can remain consistent even though the speaker keeps far/close distance with the microphones. To set AGC for “each” microphone, you would require BXB’s graphical control software.
Interface of Web Page Control Log In Default user ID: admin Default password: 00000(five zeros) Speaking Turn Off the Speaking Mic Speaking Mic Status Refuse/Allow to Speak Request for Speaking Mic...
Conference Setting Operating Mode There are four modes: 1. Normal: Under certain Open Mic Qty, delegates can randomly speak and stop talking by pressing “TALK” button. 2. Chairman: Only chairman can speak. In this mode, if delegates would like to talk, they should press “TALK” button to request for speaking.
Open Mic QTY Set 1-30 microphones turning on simultaneously. ※ Chairman microphone is always unrestricted. ※ Under Normal Mode, press “0” to set “All Mic” (all microphones can be turned on randomly). ※ Under Chairman Mode, Open Mic Qty will switch to “REQUEST”. The quantity of open microphone cannot be set in this mode.
Mic Auto-Off 10-99 seconds after delegates stop talking, the microphones can be turned off automatically. Delegates still can press “TALK” button to turn on the microphone by themselves. ※ Chairman microphone is always unrestricted. ※Invalid Delegate microphones should be turned off manually by pressing “TALK” button. Volume The volume of system’s microphones, Aux in, and other microphones can be adjusted within 50 levels.
Camera Setting Settings of microphone-camera connection. Dome Mode There are three modes of image auto-tracking: Button: Camera tracks the image when a speaker presses “TALK” button on the microphone. If more than one speakers press “TALK” button, the camera taking will stay at the last speaker who finishes talking. Other speakers should press “TALK” button again to make the camera track their images back.
Video Override To operate video override, BXB’s multi-screen video splitter should be equipped to control multiple cameras and output the images. Go Home Preset Select turning On or Off of going back to Home preset point. When there is no one speaking in the conference, turning on this function will make the camera take the image of the preset home point automatically.
Set Preset Select microphone’s ID number. Select the Select camera’s Save the setting preset point of ID number camera Each BXB’s high speed dome camera possesses 128 preset points. One main control unit is able to control 16 cameras.