Technical Data - Graco 231–406, Series A Instructions-Parts List Manual

Accessories
DANGER LABELS
The English language DANGER label shown on
page 4 is also on your sprayer. If you have
painters who do not read English, order one of the
following labels to apply to your sprayer. The
drawing below shows the best placement of these
labels for good visibility.
Order the labels directly from your Graco
distributor.
Apply other
language here
French 185–955
Spanish 185–962
German 186–042
Greek 186–046
Korean 186–050
Texture Spray Gun Kit 237–476
Replacement 3000 psi (21.0 MPa, 210 bar) texture
spray gun for the Mark V Texture Sprayer.
Ball Valve Repair Kit 237–693
Replacement parts to repair pressure drain valves
239–280 and 237–469.
Gun Handle Kit 237–680
Replacement handle with safety for the 3000 psi
(21.0 MPa, 210 bar) texture spray gun 237–476.
Motor Brush Kit 220–853
For replacing motor brushes.

Technical Data

Power Requirements (full output)
1 phase, 18A minimum
Working Pressure Range
0–210 bar)
Cycles/gallon (liter) . . . . . . . . . . . . . . . . . . . . .
Power Cord . . . . . . . . . . . . . .
Fluid Outlet Size . . . . . . . . . . . . . .
Sound Data
Sound pressure level . . . . . . . . . . . . . . . . . .
Sound power level . . . . . . . . . . . . . . . . . . . .
Measured under maximum operating conditions per
ISO–3744
Wetted Parts:
Displacement Pump . . .
Polyethylene,
Filter . . . . . Aluminum, Carbon steel, Stainless Steel,
NOTE: PTFE
and Delrin are a registered trade-
marks of the Company.
Dimensions
Weight
(w/o packaging, hose or gun)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 120 VAC, 60Hz,
. . . 0–3000 psi (0–21.0 MPa,
104 (27.5)
12 ga., 3 wire, 10 ft. (3 m)
3/8 npsf from control
85.3 db(A)
95.2 db(A)
Carbon steel, Polyurethane,
PTFE
Delrin , Leather
. . . . 137 lb (62.3 kg)
31 in. (787 mm)
25 in. (635 mm)
22.5 in. (572 mm)