ECS G41T-M9 Manual page 7

SATA1~4
CD_IN
1
CPU_FAN
1
SYS_FAN
1
ATX12V
1
ATX_POWER
1
COM
DCDB
S O U T B
GND
R T S B
RI
IDE
1
TPM
1
If you have installed a Serial ATA hard
drive, you can connect the Serial ATA
cables to the Serial ATA hard drive or the
connector.
Use this connector CD_IN to connect the
drive audio cable to the onboard sound
system, if you have installed a CD-ROM
or DVD-ROM drive.
Connect the CPU cooling fan cable to the
CPU fan connector (CPU_FAN).
Connect the cable from the cooling fan to
the SYS_FAN fan power connector.
The ATX12V is a +12V connector for
CPU Vcore power.
1
Connect the power connector from the
power supply to the ATX_POWER
connector.
Connect a serial port extension bracket to
SINB
DTRB
this header to add a second serial port to
DSRB
C T S B
your system.
K E Y
Use the IDE cable(s) to connect IDE
Primary device with the IDE channel
connector IDE (Primary).
Use this header to protect the computer
from impermissible visit.
7