Page 1
U S E R M A N U A L P O W E R E D B Y communication in motion ®...
Page 2
CONTENTS CONTENTS OF RETAIL BOX 1. INTRODUCTION ..........3 If you purchased the SRC-System™...
Page 3
1. INTRODUCTION Thank you for choosing the SRC-System™ Bluetooth® ADVANCED TECHNOLOGY communication and entertainment system for motorcycle ➤ AGC (Automatic Gain Control) technology, for the automatic helmets. This manual will help you set up, configure and use the adjustment of volume according to ambient noise and driving SRC-System™.
2. CHARGING THE BATTERY 3. UPDATES AND SETTINGS Get the most out of your SRC-System™ by changing the settings and customizing your unit according to your own personal preferences. Software updates are available via the Cardo Community on your PC / Mac*. Settings can be changed either by the Cardo Community or the Cardo SmartSet App on a compatible smartphone.
4.2 GENERAL FUNCTIONS 4.4 AUDIO SOURCES AND PRIORITIES If two connected audio sources try to play audio simultaneously, your SRC-System™ automatically determines which audio source to play Press for 2 seconds Power ON through the speakers based on the priority of the connected devices. 3 BLUE flashes with ascending tone Higher Priority 1.
5. INTERCOM 4. After a few seconds, the SRC-System™ will show a solid RED light for 2 seconds, indicating that it is paired and ready to use. The SRC-System™ allows Bike-to-Bike and Rider-to-Passenger full- duplex intercom communication at a range of up to 500m. If Pairing is not completed within 2 minutes, the units will return to To chat via Intercom, you must first pair your SRC-System™...
5.6 CLICK-TO-LINK® INTERCOM (CTL) 6. PAIRING AND USING A MOBILE PHONE, GPS DEVICE OR MP3 PLAYER Click-to-Link is the spontaneous, “social” feature of your SRC-System™. Use Click-to-Link to make intercom calls with other riders nearby without pre-pairing. Click-to-Link can be disabled on your unit effectively blocking any attempt by others to make Click-to-Link calls to you.
6.3 MAKING AND RECEIVING PHONE CALLS IMPORTANT! • If you have paired 2 different mobile phones directly to your Answer a call or say any word loudly to answer by VOX SRC-System™, you will need to set one as default for making calls. During a phone call, press a for 5 seconds Remain silent for 15 seconds, or press Reject a call...
9. NOTICES SWITCHING BETWEEN A2DP AUDIO SOURCES 1. Stop the music playback from the current device. Important Notes: 2. Start music playback from the other device. Riding a motorcycle, scooter, moped, ATV, quad bike or any other vehicle requires your full and undivided attention.
Page 11
(jointly referred to as “Vehicle”) • Increase the separation between the equipment and receiver. requires your complete and undivided attention. Schuberth GmbH. and Cardo Systems, Inc., • Connect the equipment into an outlet on a circuit different from that to which the receiver is including their respective Officers, Directors, Affiliates, Parent Company, Representatives, Agents, connected.
Page 12
3. You confirm that you are physically capable to use the Device and that you have no medical FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. THE DEVICE AND ITS ACCESSORIES ARE conditions or needs that may infringe upon your abilities to do so in a safe manner. You confirm PROVIDED “AS IS”...
Need help?
Do you have a question about the ER18 and is the answer not in the manual?
Questions and answers