Motorola MOTO E Troubleshooting Manual page 13

3. Touch More
4. Touch VPN
5. Touch + in the upper right.
6. Touch the type of VPN you want to add.
7. Enter the Name you would like for the VPN. (EX. School, work, etc)
8. Select the Type of VPN you are trying to Add.
o PPTP VPN - Point-to-Point Tunneling Protocol
o L2TP VPN - Layer 2 Tunneling Protocol
o L2TP/IPSec PSK VPN - Pre-shared key based L2TP/IPSec VPN
o L2TP/IPSec RSA VPN - Public Key based L2TP/IPsec
o IPSec Xauth PSK - Pre-shared Key Based IPSec Xauth VPN
o IPSec Xauth RSA - Public Key Based IPSec Xauth VPN
o IPSec Xauth Hybrid - Authentication on both server and client, IPSec Xauth VPN
9. In the screen that opens, follow the instructions from your network administrator to configure
each component of the VPN's settings.
10. Press MENU and Touch Save
The VPN is added to the list on the VPN settings screen.
To connect to a VPN:
1. From the Home Screen, press MENU.
2. Touch Settings
3. Touch MORE
4. Touch VPN
5. Touch the VPN you want to connect to.
6. In the dialog that opens, enter any requested credentials and touch Connect.
When you're connected to a VPN, you receive an ongoing notification in the status bar. If you
are disconnected, you receive a notification that you can use to return to the VNP settings
screen so you can reconnect to it
To disconnect from a VPN:
1. Open the Notifications panel and touch the ongoing notification for the VPN connection.
2. Touch the ongoing VPN notification to disconnect.