Iridium Pilot Quick Start Manual page 3

Required Materials for Installation:
1. User supplied pole/mast/mounting location
2. Windows compatible computer
3. Ethernet cable (installer/customer provided)
4. RJ11 telephones
5. Slotted and Phillips screw drivers
6. Hammer and center punch
7. Power drill and associated bits
8. Wire cutters
9. Wire strippers and terminal lug crimper
10. RJ-45 crimp tool
11. Electrical tape
12. Anti-seize compound
13. Ground connection location
14. Electrical clips (alligator clips)
Exposure to radio frequency energy (RF) from the antenna may cause thermal injuries including
tissue damage from increased heating and body temperature. Do not substitute any antenna for the
one supplied or recommended by the manufacturer or radio dealer. Substitution of antennas could
cause exposure to excess radio frequency radiation which could result in serious injury or death.
Blasting Areas
To avoid interfering with blasting operations, turn your device OFF when in a "blasting area" or in
areas posted: "Turn off two-way radio. " Obey all signs and instructions. Failure to do so could result in
serious injury or death.
WARNING
WARNING