Kyocera Dura Force PRO User Manual page 124

3. Tap the ON/OFF switch to turn Wi-Fi on
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap the switch again

4. Tap a Wi-Fi network to connect, enter the password (if it's not an open network), and then tap
CONNECT.
 Your phone is connected to the Wi-Fi network. You will see (
The password, for a household wireless LAN router, is sometimes found on a sticker on the

router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.

Connectivity
.
.
) in the status bar.
115