Advertisement
Installation
1. Open glove box and using European keys remove
the CD changer in the glove box.
2. Disconnect all wiring harness from CD changer.
3. Follow the fiber optic connection guide to connect
the supplied optic cable into the most network
4. Connect fiber optic cables to the interface and
connect the yellow wire from the Molex connector
to constant +12volts and the black wire to vehicle
ground. Plug in Molex connector into interface.
5. Connect the USB cable to the interface.
6. Place the interface module and the Sirius Tuner
behind the glove box.
7. Reconnect the CD changer wiring and reinstall it.
8 Pin Molex wiring guide
Pin (3) Ground – Black wire
Pin (7) +12Volt Constant Power – Yellow wire
2 |
P a g e
Tool Image
European radio removal keys.
8 Pin Molex connector image
Advertisement
