Page 2
Paper shredder HSM shredstar ....... . . 3 français: Destructeur de documents HSM shredstar .
Page 3
Risk of injury from being pulled Keep long hair, loose articles of clothing, ties, scarves, jewellery, etc. away from feed opening. Material with the tendency to form loops, e.g. tapes, strapping mate- rial, etc. must not be shredded. 07/2016 HSM shredstar...
Mains switch Type plate on the underside of the cut- ting head Operating and display elements Display option: Ready for operation Power Operation button Overload Overload Motor overheats Reverse button Overheat Bin full Bin full 07/2016 HSM shredstar...
Page 5
The light barrier starts the cutting unit automatically. Therefore, with thin paper strips, make sure the light bar- rier detects them. If feed opening is free again, the cut- ting unit shuts down and the shredder switches to standby. 07/2016 HSM shredstar...
Page 6
The “Ready for operation” indicator goes out. For all other malfunctions, check whether the • Set mains switch at rear of paper shredder cutting head is correctly positioned on the to “0”. shredded material container before contact- ing our customer service. 07/2016 HSM shredstar...
Page 7
Service work which requires the returning and recycling electric and elec- housing covers to be removed tronic devices. Dispose of all the packaging may only be carried out by HSM materials also in an environmentally-respon- Customer Service and service sible way.
The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters. This document shredder meets the applicable harmonisation legislation of the European Union: • Low Voltage directive 2014/35/EU • EMC directive 2014/30/EU • RoHS directive 2011/65/EU The EU declaration of conformity can be requested from the manufacturer. 07/2016 HSM shredstar...
Need help?
Do you have a question about the shredstar X6pro and is the answer not in the manual?
Questions and answers