Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Garz & Fricke VINCELL LT 5.0 inch Boxed
Summary of Contents for Garz & Fricke VINCELL LT 5.0 inch Boxed
- Page 1 VINCELL LT 5.0" Boxed Manual For PCB revision 0.7 or for HW 1.1 or later...
- Page 2 VINCELL LT 5.0" Boxed Manual Content Introduction Safety Hints Product Introduction Product Introduction Type plate and device information Related documents and online support Product Description Technical data PCB design and Pin assembly Installation and start up Connection Scheme External interfaces and Schematics Speaker (X9) Ethernet (X104) Power (X1)
-
Page 3: Introduction
VINCELL LT 5.0" Boxed Manual 1 Introduction Thank you very much for purchasing a Garz & Fricke product. Our products are dedicated to professional use and therefore we suppose extended technical knowledge and practice in working with such products. The information in this manual is subject to technical changes, particularly as a result of continuous product upgrades. -
Page 4: Safety Hints
VINCELL LT 5.0" Boxed Manual 2 Safety Hints Please read this section carefully and observe the instructions for your own safety and correct use of the device. Observe the warnings and instructions on the device and in the manual. Garz & Fricke embedded systems have been built and tested by us and left the company in a perfectly safe condition. -
Page 5: Product Introduction
VINCELL LT 5.0" Boxed Manual 3 Product Introduction This document is applicable for hardware revisions 1.0 or later of the VINCELL LT SERIES and thereon based customized variants. Please note that customized variants might possibly not support all features listed herein. Please find the hardware version grid in Annex A: Product Introduction... -
Page 6: Related Documents And Online Support
VINCELL LT 5.0" Boxed Manual Related documents and online support This document contains product specific information. Additional documentation is available for the use of embedded operating systems and the related tool chain and the RedBoot BIOS. Description Title Link to Garz & Fricke Website RedBoot User Manual GF_RedBoot_User_Manual_Rnn.pdf Contains relevant information about BIOS,... -
Page 7: Product Description
VINCELL LT 5.0" Boxed Manual 4 Product Description This drawing is meant for your orientation. For drawing please refer to Annex B: Mechanical specifications You will get 3 D Modell (CAD) Drawings after signed a NDA contract. Frame Display with Resistive Touch Micro SD-Card Slot Connectors and... -
Page 8: Technical Data
VINCELL LT 5.0" Boxed Manual Technical data Class Freescale ARM®-Cortex -A8 i.MX537 Type/Clock 800 MHz NEON for SIMD media acceleration and VFP operations L1 cache, 32 KB for instruction, 32 KB for data Features Unified 256 KB L2 Cache Multi-format HD 1080p video decoder and HD 720p video encoder hardware engine OpenGL®... - Page 9 VINCELL LT 5.0" Boxed Manual Resistive Touch Type 4-wire analog resistive Linearity ±1.5% Surface Treatment Antiglare Power Supply and Consumption Nom. 12 ~ 24 Supply [V DC] Min./Max. 9 ~ 30 Consumption [W] Typ. 6.0 Type 3 V lithium manganese dioxide Type CR1220 Internal Backup Battery Lifetime (RTC only) Approximately 8 years, depending on application...
-
Page 10: Pcb Design And Pin Assembly
VINCELL LT 5.0" Boxed Manual PCB design and Pin assembly As this manual describes a boxed version, only the external interfaces will be mentioned in the following chapter Pos. Description Pos. Description Speaker (X9) RS-232/RS-485/CAN (X39) Ethernet (X104) USB-Host (X34) Power (X1) USB-OTG (X20) Option: eBus (X108) -
Page 11: Installation And Start Up
VINCELL LT 5.0" Boxed Manual 5 Installation and start up The content of this document is limited to explain the device connectors and how to access VINCELL LT via FTP over your local area network (LAN) within a few seconds. For advanced hardware specifications and software support, please refer to chapter Product Link to Garz &... -
Page 12: External Interfaces And Schematics
VINCELL LT 5.0" Boxed Manual 6 External interfaces and Schematics Speaker (X9) Name Description Level Speaker out + 1.5W @ 8 Ohm 3W @ 4 Ohm Speaker out - Header: JST S2B-PH-SM3-TB, side entry, RM = 2.0, 2-pin Plug: JST PHR-2, crimp contact BPH-002T-P0.5S Ethernet (X104) Name Description... -
Page 13: Power (X1)
VINCELL LT 5.0" Boxed Manual Power (X1) Name Description Level Nom. 12 ~24 ± 15% 1 Vin+ Input Voltage Min/Max. 9 ~ 30 2 Vin- Input Voltage Header: Phoenix Contact MC1,5/2-G-3,81 2p Plug: MCC 1/ 2-STZ-3,81 2p, crimp contact MCC-MT 0,5-1,0 Shielding with 6,3 mm male spade terminal connector GND/Vcc_In is not galvanic isolated from System-GND... -
Page 14: Rs-232/Rs-485/Can (X39)
VINCELL LT 5.0" Boxed Manual RS-232/RS-485/CAN (X39) Name Description Level Ground RS-232_TXD1 Port #1: Transmit data (Output) V.28 RS-232_RXD1 Port #1: Receive data (Input) V.28 RS-232_RTS1 Port #1: Request-to-send (Output) V.28 RS-232_CTS1 Port #1: Clear-to-send (Input) V.28 RS485 Termination high side, bridge RS485_A_T+ with T+ RS485 Termination low side, bridge... -
Page 15: Usb - Host (X34)
VINCELL LT 5.0" Boxed Manual USB - Host (X34) Name Description Level Power supply Data minus Data plus Ground Header: USB Type A USB - OTG (X20) Name Description Level Power supply Data minus Data plus Device ID Ground Header: Micro-USB Type AB... -
Page 16: Battery
VINCELL LT 5.0" Boxed Manual Battery Battery holder X2 Name Description Level Supply Ground Header: Keystone 1056 Battery: CR1220 Battery VINCELL LT V1.1.1... -
Page 17: Document Revision History
VINCELL LT 5.0" Boxed Manual 7 Document revision history The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. Author Description Revision... -
Page 18: Technical Support
VINCELL LT 5.0" Boxed Manual 8 Technical support Before contacting the Garz & Fricke support team, please try to help yourself by the means of this manual or any other documentation provided by Garz & Fricke or the related websites. If this does not help at all, please feel free to contact us. - Page 19 VINCELL LT 5.0" Boxed Manual Technical Appendix For PCB revision 0.7 or for HW 1.1 or later...
-
Page 20: Annex A: Hardware Revision Information
VINCELL LT 5.0" Boxed Manual Annex A: Hardware revision information This document is applicable for all products listed below. Please note that customized variants might possibly not support all features listed herein. Additional features are documented in specific attachments. Article Number Marking on PCB Platform VINCELL LT... -
Page 21: Annex B: Mechanical Specifications
VINCELL LT 5.0" Boxed Manual Annex B: Mechanical specifications B-1 Mechanical Drawings Tbd. -
Page 22: Annex C: Quality And Incoming Inspections
VINCELL LT 5.0" Boxed Manual Annex C: Quality and Incoming Inspections C-1 Display... - Page 23 VINCELL LT 5.0" Boxed Manual...
- Page 24 VINCELL LT 5.0" Boxed Manual...
- Page 25 VINCELL LT 5.0" Boxed Manual...
- Page 26 VINCELL LT 5.0" Boxed Manual...
- Page 27 VINCELL LT 5.0" Boxed Manual...
-
Page 28: C-2 Evaluation Criteria Of Standard Display Module
VINCELL LT 5.0" Boxed Manual C-2 Evaluation criteria of standard display module Evaluated Zone 1: Areas in the immediate viewing area: dirt and dust enclosures / stains / striae / scratches from max. 500 µm (diameter) or 0.02 mm2 (surface), 5 pcs. per dm permitted, but no clustering. -
Page 29: Annex D: Battery
VINCELL LT 5.0" Boxed Manual Annex D: Battery D-1 Battery Specifications The internal baseboard is equipped with a Primary Lithium battery (type CR1220), which has a typical lifetime of 8 years. Typically we assemble one of the following batteries: Type Garz &... -
Page 30: D-2 Replacement Of The Internal Battery
VINCELL LT 5.0" Boxed Manual D-2 Replacement of the internal battery The internal battery is placed as per figure below. For replacement, the SD-card and the back cover have to be removed. The device shall be opened by authorized and skilled personnel only. Danger of electric hazard! First before opening, please make sure that the unit is completely disconnected from any power supply, direct or indirect. -
Page 31: Annex E: Guidelines And Standards
VINCELL LT 5.0" Boxed Manual Annex E: Guidelines and Standards E-1 EC Declaration of Conformity Tbd. E-2 EMC Certifications Tbd. E-3 RoHS Declaration Devices comply with the requirements of Directive 2011/65/EU of the European Parliament and of the Council from the 8 of June 2011 concerning the restriction of the use of certain hazardous substances in electrical and electronic equipment. -
Page 32: Annex F: Common Documentation
VINCELL LT 5.0" Boxed Manual Annex F: Common documentation F-1 Warranty hints Garz & Fricke embedded systems are subject to manufacturer’s guarantee as long as the products are handled with adequate care and caution and in accordance to this manual. The period of guarantee starts from the date of shipment The products are warranted against defects in material, quality and functionality within the guaranteed period. -
Page 33: F-2 Application Notes
VINCELL LT 5.0" Boxed Manual F-2 Application notes The products covered by this document are designed and manufactured for the following applications (I). If you intend to use these products in applications as quoted in (II) or (III) we highly recommend a personal contact with our consultants and/or technical sales team.
Need help?
Do you have a question about the VINCELL LT 5.0 inch Boxed and is the answer not in the manual?
Questions and answers