Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Garz & Fricke VINCELL LT series
Summary of Contents for Garz & Fricke VINCELL LT series
- Page 1 VINCELL LT core Manual For PCB revision 0.7 or for HW 1.1 or later...
-
Page 2: Table Of Contents
VINCELL LT core Manual Content Introduction Safety Hints Product Introduction Product introduction Type plate and device information Related documents and online support Technical data Block diagram PCB design and Pin assembly Installation and start up Connection Scheme Internal and external interfaces and Schematics Speaker (X9/X10) Ethernet (X104) Power (X1) -
Page 3: Introduction
VINCELL LT core Manual 1 Introduction Thank you very much for purchasing a Garz & Fricke product. Our products are dedicated to professional use and therefore we suppose extended technical knowledge and practice in working with such products. The information in this manual is subject to technical changes, particularly as a result of continuous product upgrades. -
Page 4: Safety Hints
VINCELL LT core Manual 2 Safety Hints Please read this section carefully and observe the instructions for your own safety and correct use of the device. Observe the warnings and instructions on the device and in the manual. Garz & Fricke embedded systems have been built and tested by us and left the company in a perfectly safe condition. -
Page 5: Product Introduction
VINCELL LT core Manual 3 Product Introduction This document is applicable for hardware revisions 1.0 or later of the VINCELL LT SERIES. Please find the hardware version grid in Annex B: Product introduction VINCELL LT is an Embedded System to be used as human machine interface (HMI) in various applications. -
Page 6: Related Documents And Online Support
VINCELL LT core Manual Related documents and online support This document contains product specific information. The following additional documentations are available: Description Title Link to Garz & Fricke Website RedBoot User Manual Contains relevant information about GF_RedBoot_User_Manual_V.0.7.pdf BIOS, boot logo, display settings, etc. Windows OS Manual GF_WindowsCE_Manual_Vn.n.pdf Contains information about Windows... -
Page 7: Technical Data
VINCELL LT core Manual 4 Technical data Class Freescale ARM®-Cortex -A8 i.MX537 Type/Clock 800 MHz NEON SIMD media acceleration and VFP operations L1 cache, 32 KB for instruction, 32 KB for data Features Unified 256 KB L2 Cache Multi-format HD 1080p video decoder and HD 720p video encoder hardware engine OpenGL®... - Page 8 VINCELL LT core Manual Interfaces Internal 1x 480 Mbit/s Host Audio Microphone input, Line In, Line Out Display 24 Bit RGB interface Backlight Integrated LED Driver. Typ: 40mA Touch 4-wire resistive touch interface Power Supply and Consumption Nom. 24 ± 15% Supply [V DC] Max.
-
Page 9: Block Diagram
VINCELL LT core Manual Block diagram... -
Page 10: Pcb Design And Pin Assembly
VINCELL LT core Manual PCB design and Pin assembly As this manual describes a core version, the internal and external interfaces will be mentioned in the following chapter. Pos. Description Pos. Description Speaker (X9/X10) Keypad/SPI/I²C (X21) Ethernet (X104) Micro SD Card (X31) Power (X1) Battery-Holder (X2) Option: eBus (X108) -
Page 11: Installation And Start Up
VINCELL LT core Manual 5 Installation and start up The content of this document is limited to explain the device connectors and how to access VINCELL LT via FTP over your local area network (LAN) within a few seconds. For advanced hardware specifications and software support, please refer to chapter 3.3 Related documents and online support Product... -
Page 12: Internal And External Interfaces And Schematics
VINCELL LT core Manual 6 Internal and external interfaces and Schematics Speaker (X9/X10) Name Description Level Max. 1 W @ 8 Ω or 2 W @ 4 Ω Speaker out + (X9 internally connected to X10) Speaker out - Header: JST S2B-PH-SM3-TB, side entry, RM = 2.0, 2-pin Plug: JST PHR-2, crimp contact BPH-002T-P0.5S... -
Page 13: Power (X1)
VINCELL LT core Manual Power (X1) Name Description Level Vin+ Input Voltage 10-36V Vin- Input Voltage Header: Phoenix Contact MC1,5/2-G-3,81 2p Plug: MCC 1/ 2-STZ-3,81 2p, crimp contact MCC-MT 0,5-1,0 Shielding with 6,3 mm male spade terminal connector GND/Vcc_In is not galvanic isolated from System-GND... -
Page 14: Rs-232/Rs-485/Can (X39)
VINCELL LT core Manual RS-232/RS-485/CAN (X39) Name Description Level Ground RS-232_TXD1 Port #1: Transmit data (Output) V.28 RS-232_RXD1 Port #1: Receive data (Input) V.28 RS-232_RTS1 Port #1: Request-to-send (Output) V.28 RS-232_CTS1 Port #1: Clear-to-send (Input) V.28 RS485 Termination high side, bridge RS485_A_T+ with T+ RS485 Termination low side, bridge... -
Page 15: Keypad/Spi/I²C (X21)
VINCELL LT core Manual Keypad/SPI/I²C (X21) Keypad/SPI/I²C, multiplexed Description Name Level Ground Ground Ground Ground GPIO5_29 GPIO6_17 KP_ROW5_GPIO1_11 ROW5 GPIO6_18 KP_ROW6_GPIO5_25 ROW6 KP_COL7_GPIO1_4 COL7 KP_ROW4_GPIO4_15 ROW4 KP_COL4_GPIO4_14 COL4 KP_ROW3_I2C2_SDA_ I²C SDA I²C2 SDA GPIO4_13 KP_COL3_I2C2_SCL_ I²C2 SCL I²C2 SCL ECSPI1_SS3_GPIO4_12 3,3 V KP_COL5_ECSPI1_RDY_ COL5... -
Page 16: Usb - Host (X34)
VINCELL LT core Manual USB - Host (X34) Name Description Level Power supply Data minus Data plus Ground Header: USB Type A USB - OTG (X20) Name Description Level Power supply Data minus Data plus Device ID Ground Header: Micro-USB Type AB Micro SD Card (X31) Name Description... -
Page 17: Battery-Holder (X2)
VINCELL LT core Manual Battery-Holder (X2) Name Description Level Supply Ground Header: Keystone 1056 Battery: CR1220 Battery VINCELL LT V1.1.1... -
Page 18: Display Connector (X105/X106)
VINCELL LT core Manual Display connector (X105/X106) 6.10 Default configuration is X105 assembled. X106 is an option X 105 Name Description Level VLEDN LED backlight driver - Typ 40mA VLEDP LED backlight driver + Typ 40mA Ground VCC_LCD Supply LCD 3.3V LCD_R0 RGB red value... - Page 19 VINCELL LT core Manual X 106 Name Description Level Ground Ground VCC_LCD LCD Supply 3.3V VCC_LCD LCD Supply 3.3V LCD_R0 RGB red value 3.3V LCD_R1 RGB red value 3.3V LCD_R2 RGB red value 3.3V LCD_R3 RGB red value 3.3V LCD_R4 RGB red value 3.3V LCD_R5...
-
Page 20: Capacitive Touch Connector (X107)
VINCELL LT core Manual Capacitive Touch connector (X107) 6.11 Name Description Level Ground Supply 3.3V I2C3_SCL I²C clock 3.3V 1kOhm Pullup Not connected I2C3_SDA I²C data 3.3V 1kOhm Pullup Not connected CTOUCH_RESETn Reset 3.3V 1kOhm Pullup CTOUCH_WAKEn Wake 3.3V 1kOhm Pullup CTOUCH_INT# Interrupt 3.3V 1kOhm Pullup... -
Page 21: Document Revision History
VINCELL LT core Manual 7 Document revision history The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. Author Description Revision... - Page 22 VINCELL LT core Manual Technical Appendix For PCB revision 0.7 or for HW 1.1 or later...
-
Page 23: Annex A: Assembly Options And Accessory
VINCELL LT core Manual Annex A: Assembly options and accessory Tbd. -
Page 24: Annex B: Hardware Revision Information
VINCELL LT core Manual Annex B: Hardware revision information This document is applicable for all products listed below. Please note that customized variants might possibly not support all features listed herein. Additional features are documented in specific attachments. Article Number Marking on PCB Platform VINCELL LT core... -
Page 25: Annex C: Battery
VINCELL LT core Manual Annex C: Battery C-1 Battery Specifications The internal baseboard is equipped with a Primary Lithium battery (type CR1220), which has a typical lifetime of 8 years. In case of presence of SRAM, battery has lifetime of about 2 years. (75% power down). Type Garz &... -
Page 26: Replacement Of The Internal Battery
VINCELL LT core Manual C-2 Replacement of the internal battery The internal battery is placed as per figure below. For replacement, the SD-card and the back cover have to be removed. The device shall be opened by authorized and skilled personnel only. Danger of electric hazard! First before opening, please make sure that the unit is completely disconnected from any power supply, direct or indirect. -
Page 27: Annex D: Guidelines And Standards
VINCELL LT core Manual Annex D: Guidelines and Standards D-1 RoHS Declaration Devices comply with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. -
Page 28: Annex E: Common Documentation
VINCELL LT core Manual Annex E: Common documentation E-1 Warranty hints Garz & Fricke embedded systems are subject to manufacturer’s guarantee as long as the products are handled with adequate care and caution and in accordance to this manual. The period of guarantee starts from the date of shipment The products are warranted against defects in material, quality and functionality within the guaranteed period. -
Page 29: Application Notes
VINCELL LT core Manual E-2 Application notes The products covered by this document are designed and manufactured for the following applications (I). If you intend to use these products in applications as quoted in (II) or (III) we highly recommend a personal contact with our consultants and/or technical sales team.