Cordless Shaving - Silvercrest SRR 3.7 E5 Operating Instructions Manual

Cordless shaving

CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
This shaver can be used without the power cable. In this case, you
must charge the appliance before initial use (see section "Charging
the rechargeable battery with/without the charger").
1) Attach the cutting unit
shaft . Ensure that the connector
drive shaft
2) Remove the protective cap
3) Press the ON/OFF button
charge indicator
as soon as the shaver starts up.
NOTE
► The best results are achieved if used on dry skin.
► It can take 2 to 3 weeks until the skin is accustomed to the dry
shaving system.
4) Move the shaving heads
over the skin.
5) After you have covered all the areas you want to shave, press
the ON/OFF button
The display disappears at once.
6) Clean the shaver after every use with the supplied brush
For a more thorough cleaning, read the section "Cleaning and
care".
SRR 3.7 E5
with the connector
and clicks into place.
.
. The symbol
and the
with straight and circular motions
. The appliance stops.
onto the drive
fits correctly into the
of the battery
logo are displayed
GB │ IE │ NI
.
│
11 ■