Step 20: The Sparetire Bracket - Dongfang Motor DF150GKA Assembly Instructions Manual

7.3 Fasten that 2 bolts of the top roll bar and roll bar.Fasten the Top roll bar with the bolts
at the end of it.

Step 20: the Sparetire Bracket

1、Place the ruber dust cover to the bushing end of the sparetire bracket. Then put it in to
the fixture of the roll bar.
2、You may choose 2 M10X80 hex flange bolt and M10 hex flange nuts firstly. Insert the
screw driver into the sparetire bracket fixture and make the hold in right same place. Place
the bolt from outside to inside through the hole and fasten with the hex nut.