Mitsubishi QJ71PB92V-U-HW User Manual page 17

*1 The LED flashes at intervals based on the value set in "Data control time" in
Master Parameters.
*2 The LED flashes at the time of request or response in acyclic communication.
*3 The LED status during token passing varies depending on the number of DP-
Masters within the same network and the transmission speed setting, as shown
the Table 4.3.
No. of DP-Masters within the
same network
1
More than 1
Table 4.3 TOKEN LED status
19.2kbps or less
Flashing
8
Transmission speed
93.75kbps or more
ON
ON or OFF