Table of Contents
Advertisement
Step 6.
Connect all power cables.
Removing the redundant power supply from a standard equipment rack
To remove the redundant power supply from a standard equipment rack, complete the following steps:
Step 1.
Disconnect all external cables.
Step 2.
Loosen and remove M6 screws, washers, and clip nuts (or cage nuts) to remove the redundant
power supply from the rack.
Step 3.
Slide the redundant power supply out of the rack.
Step 4.
Loosen and remove the M4 screws attaching the mounting bracket on each side of the redundant
power supply.
12
Lenovo RackSwitch G7000 Redundant Power Supply Installation Guide
Advertisement
Table of Contents
