Table of Contents
Advertisement
the instructions that come with the
child restraint say that the top strap
must be anchored.
In Canada, the law requires that
forward-facing child restraints have
a top tether, and that the tether be
attached.
If the child restraint does not have
the LATCH system, you will be
using the safety belt to secure the
child restraint in this position. Be
sure to follow the instructions that
came with the child restraint. Secure
the child in the child restraint when
and as the instructions say.
If more than one child restraint
needs to be installed in the rear
seat, be sure to read Where to Put
the Restraint on page 3 47.
The vehicle's lap-shoulder belts for
the first and second row seating
positions are equipped with
free-falling latch plates. If the
vehicle has a third row, the
lap-shoulder belts have cinching
latch plates.
Use the following pictures to
determine the latch plate style:
Free-Falling Latch Plate
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
Cinching Latch Plate
1. Put the child restraint on
the seat.
3-59
Advertisement
Table of Contents
