Quantum Rehab Mobility Power Chair Operation Instructions Manual page 14

14
! Tilt Function (Optional)
1. Press the power key to power on the module.
2. Press Select until the actuators in both the back and seat are illuminated
on the actuator indicator on the module. Use the up and down arrows to
increase or decrease the degree of tilt.
3. To return to a sitting position or to a 0° tilt position, press Select until the
actuators in both the back and seat are illuminated on the actuator indicator
on the module, and then press the down arrow until the seat is in a sitting
position.
! Seat Elevator Function (Optional)
1. Press the power key to power on the module.
2. Press Select until the actuator on the seat is illuminated on the actuator
indicator on the module. Use the up and down arrows to increase or decrease
the height of the seat.
3. To lower the seat to its original position, press Select until the actuator
on the seat is illuminated on the actuator indicator on the module, and
then press the down arrow until the seat is lowered to its original position.
! Leg Rest Function (Optional)
1. Press the power key to power on the module.
2. Press Select until the desired leg rest actuator is illuminated on the actuator
indicator on the module. Use the up and down arrows to increase or decrease
the degree of elevation.
3. To return the leg rest to a lowered position, press Select until the desired
leg rest actuator is illuminated on the actuator indicator on the module,
and then press the down arrow until the leg rest is in a lowered position.
! Independent/Combined Leg Rest Function (Optional)
1. Press the power key to power on the module.
2. Press Select to cycle through the left, right, and combined leg rests until
the desired leg rest actuator is illuminated on the actuator indicator on
the module. Use the up and down arrows to increase or decrease the degree
of elevation.
Synergy TRU-Balance Power Recline
Basic Operation Instructions
www.quantumrehab.com