Pride 1122 3SP, 1122 4MP Owner's Manual page 27

V . C O M F O R T
Foot Platform Height Adjustment
The foot platform height can be easily adjusted to one of
six different heights.
To raise or lower the foot platform:
1. Remove the nuts and bolts from the foot platform
bracket. See figure 18.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the nuts and bolts to the foot platform bracket
and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the nuts and bolts from the foot platform
bracket. See figure 18.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the nuts and bolts to the foot platform bracket
and tighten.
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex key.
See figure 19.
To adjust the foot platform angle:
1. Locate the setscrew on the underside of the foot plat-
form.
2. Turn the setscrew to raise or lower the front of the foot
platform.
Swing-away Footrests (Optional)
Swing-away footrests (SFRs) are an option. They enable
you to swing the footrest to the side before transferring from
your power chair.
To swing the footrests:
1. Push in the SFR release lever. See figure 20.
2. Swing the footrest off to the side.
To adjust the SFR length:
1. Remove the two screws from the side of each leg rest
extension.
2. Slide the leg rest in or out to the desired length.
3. Reinstall the two screws on each leg rest extension.
Quantum 1122 Series
A D J U S T M E N T S
BALL DETENT PIN
Figure 18. Foot Platform Height Adjustment
Figure 19. Foot Platform Angle Adjustment
FOOTREST
EXTENSION
Figure 20. Swing-Away Footrests
www.quantumrehab.com
FOOT PLATFORM BRACKET
NUTS AND BOLTS
SETSCREW
SFR RELEASE LEVER
ADJUSTMENT
SCREWS
27