Views - Parallax PropScope Manual

9
PropScope uses Views to Analyze Signals
Explore the views by clicking on the tabs. Here's a brief summary of the most commonly used

views.

Copyright © 2009 HannoWare.com
Part II: Getting Started
2.3 Views
Oscilloscope
Graphs the analog measurement
of up to 2 channels versus time.
You can control the horizontal and
vertical scale and position of the
graphed traces. The Trigger let's
you stabilize the signal. Cursors
help you manually measure your
signal. Some measurements are
continually calculated and
displayed. If your DAC/LSA card
is plugged in, you can control the
Function Generator.
Logic Analyzer
When your DAC/LSA card is
plugged in, you can use this view
to graph logic measurements
taken from 4 channels. You can
control the timescale and use
triggers to stabilize the graph.