IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 3
To assure continued operation, follow the attached installation instructions and use only shielded cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Warning -To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
Page 4
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Product the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11.
POWER SOURCE 1. Insert the plug from the supplied AC/DC Adapter to the DC In Jack on the rear of unit. 2. Insert the small plug from the supplied Adapter to the AC In Jack on the AC/DC Adapter. 3. Insert the Adapter Plug from the supplied to the wall outlet having AC100-240V~; 50/60Hz.
Page 6
MOUNTING 2.1 Mounting on the wooden wall You may use 2 pieces screws (Included) 1. Mark the position of the mounting screws on the wall using a pencil. 2. Drill the supplied screws directly into the marks that you have made on the wall and leave approx.
Page 7
LOCATION OF CONTROLS Front View Top View Rear View...
Page 8
LOCATION OF CONTROLS-REMOTE CONTROL ( Power On/Off ) Button (For main unit) ( Power On/Off ) Button (For subwoofer) 2. MO/ST ( Mono/Stereo ) Button ( Mute ) Button 3. TUNE-/ ( Skip Backward ) Button 8. BASS -/+ Button TUNE+/ ( Skip Forward ) Button 9.
Page 9
BATTERY INSTALLATION ( REMOTE CONTROL) ---First time using Remove and discard the insulation tab as the figure on right. ----Replacing battery for remote control 1. Push and slide out the battery trap as the figure below and the rear of the remote control.
EFFECTIVE DISTANCE OF REMOTE TRANSMITTER NOTES: --when there is an obstacle between the unit and the transmitter may not operate. --when direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the unit, the remote operation may be unstable. GENERAL OPERATION 1.
Page 11
LISTEN TO FM RADIO - Search and store the stations 1. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the previous procedure. 2. Press the Standby/Source button on the unit or press the SOURCE button on the remote control until the indicator turns Green.
Page 12
( For details pairing procedures, please refer to the user's manual of your BT Device.) Notes: 1. When the external BT Device searched the unit, our model number " CHT978 " will appear on display of external BT Device. 2. Pairing code "0000" or "1234" may need to enter.
Page 13
AUX IN 1:LISTEN TO TV/DVD/VCR/DVR 1. Connect the Aux out jacks from the external audio player (such like TV, DVD player, VCR …etc.) to the AUX IN 1 jacks on the rear of unit by the RCA Connection Cable as the figure below: 2.
Page 14
AUX IN 2:LISTEN TO EXTERNAL AUDIO DEVICES 1.Connect the Headphone/Earphone; Aux out jack or Line out jack from the external audio player (such like MP3 player; Disc-man … etc) to the AUX IN 2 jack on the rear of unit by the Audio Connection Cable as the figure below: 2.
Page 15
CONNECTION THROUGH OPTICAL 1. Connect the Optical out jack from the external audio player (such like TV, DVD player …etc.) to the OPTICAL IN jack on the rear of unit by the Optical Connection Cable as the figure below: 2. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as the previous procedure.
TROUBLESHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION No power AC/DC adapter not Connect the power connected AC/DC adapter. The unit is in Standby Press the button to turn mode on the unit. No sound Volume in minimum Raise volume level by position...
Page 17
GENERAL SPECIFICATIONS Power Source of the Main Unit............DC 12V Power Source of the Subwoofer............. DC 24V 2.5A Radio Coverage.....................87.5-108 MHz Impedance of Speakers: Loud Speakers ..................8 Ohm,10 W x 2 Woofer ......................8 Ohm, 50 W Audio Power: Loud Speakers: ..................10 W ( RMS ) x 2 Subwoofer: .....................45 W ( RMS ) Total:..........................65 W...
Page 18
Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state.
Need help?
Do you have a question about the CHT978 and is the answer not in the manual?
Questions and answers