D.5 Hand Clap - Elektron Analog Rytm Manual

DEC (Decay) sets the length of the decay phase. (0–127)
SYM (Symmetry) adjusts the nonlinearity in the special rimshot circuit. (-64–+63)
TIC (Tick Level) sets the level of the transient tick. (0–127)
NOL (Noise Level) sets the noise level. (0–127)
LEV (Level) sets the synth volume. (0–127)

D.5 HAND CLAP

CPCL (HAND CLAP CLASSIC)
RAT (Clap Rate) sets the rate of the hand claps. (0–127)
NUM (Clap Number) sets the number of hand claps. (0–127)
RND (Random Claps) randomizes the timing of the hand claps. (0–127)
CPD (Clap Decay) sets the length of the decay phase. (0–127)
TON (Noise Tone) sets the pitch of the noise. (0–127)
NOD (Noise Decay) sets the length of the decay phase of the noise. (0–127)
NOL (Noise Level) sets the noise level. (0–127)
LEV (Level) sets the synth volume. (0–127)
The MACHINE below can be used on the BT track.
D.6 BASS TOM
BTCL (BASS TOM CLASSIC)
TUN (Tune) sets the pitch of the oscillator. (-64–+63)
DEC (Decay) sets the length of the decay phase. (0–127)
SNP (Snap) sets the length of the snap transient. (0, 1, 2, 3)
NOL (Noise Level) sets the noise level. (0–127)
LEV (Level) sets the synth volume. (0–127)
The MACHINE below can be used on the LT, MT, and HT tracks.
D.7 LOW, MID, HIGH TOM
XTCL (TOM CLASSIC)
APPENDIX D: MACHINES
91