Device Operation - FIBARO FGIC-001 User Manual

Device operation

FIBARO Intercom allows to use rotating ring for entering PIN Codes set during the configuration process.
Correctly entered PIN code may result in authenticating the user and opening the gate.
Anyone who does not have a PIN code may use the button on the front to make a call.
To open the gate using the ring:
1) Move your hand close to the device - the button will light up in blue.
2) Rotate the ring to select the first digit of your PIN code - numbers will light up one by one.
3) Push the ring to confirm selected digit.
4) Correct entering of the digit will be confirmed by turning off the backlight.
5) Enter next digits of your PIN code in the same way. If you entered incorrect digit, pull the ring to cancel the entire sequence and start
again from the 1st digit.
6) After selecting the last, 4th digit, make a single push to open the gate connected to the first relay (R1).
Make a double push to open the gate connected to the second relay (R2).
7) The PIN code will be verified. In case of successful verification, all diodes will blink green five times and the gate will be opened.
8) Entering incorrect PIN code will be indicated by two blinks in red.
i
The default time for which the gate stays opened is 3 seconds. Its length may be adjusted by the admin through the mobile app.
The gate may be opened by using the Bluetooth low energy proximity sensor. In order to do so, move your paired smartphone with
i
enabled Bluetooth connection close to the device.
To make a call:
1) Move your hand close to the device - the button will light up in blue.
2) Press the button.
3) LED diodes will start flashing - wait for a call.
4) If no one responds to your call, you will be able to leave your message in the voice mail.
Voice mail functionality:
Enabling the voice mail is indicated by the red button backlight, numbers flashing in red, and a beep.
Maximum length of the voice message is 30 seconds.
www.domotica-shop.nl
DOORBELL MODE 25