PRESONUS Microphone Preamplifier User Manual page 14

9) Turn up the gain control knob on the front panel of the FireStudio Project for channel 1 while
speaking/singing into the microphone or playing your instrument. You should see the input meter in
Cubase LE react to the input. Adjust the gain so the input level is near its maximum without clipping.
10) Connect a set of headphones to the FireStudio Project headphone output. You may also wish to connect
monitors to the FireStudio Project's Main Outs.
11) You are now ready to record.
Cubase LE help is available by pressing <F1> on your keyboard or online by visiting www.steinberg.net.
OPERATION
4) Right-click in the track space within the new
5) When the Add Audio Track dialogue appears,
6) Click the Record Enable button to arm the new
7) Click the Monitor button to hear the input through
8) Select FireStudio Project input 'Stereo In > Left'.
12 | PreSonus 2007
project and select 'Add Audio Track' from the
dropdown menu which appears.
You can also add a track by entering the
menu and selecting 'Add Track'.
choose the number of Audio Tracks you wish to
add, whether they will be Mono or Stereo and then
click 'OK'.
If you have two audio signals making up a stereo
pair (i.e. keyboard, FX processor, cd player, etc.),
you should use a Stereo Configuration.
Otherwise, if you have a single, mono audio source
(i.e. microphone or instrument), you will want to
choose a Mono Configuration.
track for recording.
the FireStudio Project's 1/2 and Main CR outputs.
When choosing a mono from a stereo pair, the
"left" channel is typically the odd-numbered
channel, and the "right" channel is typically the
even-numbered channel (i.e. Left is 1; Right is 2).
Press <F4> on your keyboard to enter the VST
Connections menu for more details on your
specific input and output routing.
Project