Table of Contents
Advertisement
CONTROLS & CONNECTIONS
The Stereo Output
control adjusts the output level of the
Stereo Mix Bus
.
This
potentiometer governs the output level of the Bus. Channels are assigned to the bus via the L/R assign
switch on the individual pre-amp channels.
Headphone
control is located above the 1/4-inch stereo headphone output on the front panel. This
potentiometer regulates the volume of the headphones. The signal monitored by the headphones is the
same as the Stereo Mix Bus output.
2 . 4
B A C K
P A N E L
B A S I C
L A Y O U T
Input Jack
The
of the M80 features a Neutrik
Combo connector. This connector accepts either a
male XLR for microphones or high impedance instruments via the ¼ inch portion of the connector. When
an instrument cable is inserted into the ¼ inch portion of the connector, the XLR interface to the
microphone transformer is disconnected.
10
Hide quick links:
Advertisement
Table of Contents
