Advertisement
Placing a Call
You can place a call in a number of ways ways:
1.
Using the Handset
- Pick up the handset
- Enter the number, Press OK or the Send soft key.
Note: The # key is configured as a Send key by default
2. Using the hands-free speakerphone
- With the handset on hook press the Speaker button
-
Enter the number, press OK or the Send soft key
3.
Using the headset
- Press
- Enter the Number, press OK or the Send soft key.
Placing a Call on Hold
To place an active call on hold (only one active call can be in progress at any time)
1. Press the Hold soft key while on an active call
To resume a held call:
2. Press the Resume soft key
To make another call while the original caller is on hold
1.
Press the line button, enter the required number
2. Press
3. Press the Resume soft key or press the corresponding line button to retrieve the call.
Placing Multiple Calls
It is possible to make multiple calls however, only one active call can be in progress at any time, other calls are
placed on hold.
To make a new call during an active call:
1. Press
2. Press the New Call soft key.
3. Enter the desired number using the keypad or on-screen keypad.
4. Press or the Send soft key.
You can press
or
key to retrieve the highlighted call.
Yealink T41P Phone QRG
to activate the headset mode.
or
to switch between the Active and Held call
or press the Hold Soft key (to place the original call on hold).
to switch between calls, or press the swap soft key and then press the Resume soft
or the line button.
2
Yealink T41P
12/07/17
Advertisement
