Placing a Call
You can place a call in a number of ways:
1.
Enter a number
-
Then pick up the handset
2. Press the New Call soft key
- Then dial the number
3. Using the hands-free speakerphone
-
Enter a number using the keypad
-
Press Speakerphone
4. Using the headset
-
Enter a number using the keypad
-
Press Headset
-
Answering Calls
You can answer a call either using the handset, headset or speakerphone. To answer an incoming call:
1. Lift the Handset
-
Press the Answer soft key
-
Press the flashing amber line key
2. If you are using the Headset
-
Ensure the Headset
-
Press the Answer soft key, or
3. Press the Speaker
Placing a Call on Hold
To place an active call on hold:
•
Press the Hold button
To resume a held call:
•
Press
Placing Multiple Calls
It is possible to make multiple calls however, only one active call can be in progress at any time, other calls are
placed on hold.
To make a new call during an active call:
4. Press the Hold
5. Press the New Call soft key
6. Enter the desired number using the keypad
7. Select the Swap soft key to toggle between the two calls
Cisco 7800 series Phone QRG
, or
button is pressed
button
on the phone
on the phone or tap the Resume soft key
button (to place the original call on hold
2
Cisco 7800 series
10/07/19