Advertisement
WARNING
Before using the product in vacuum mode,
you must assemble the upper and lower
vacuum tubes together. This is a one-time
operation only. Never operate the vacuum
with only the upper vacuum tube fitted.
The risk of personal injury is significantly
increased if you fail to follow this warning.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
■
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury
and fire
■
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small
metal objects that can make a connection
from one terminal to another. Shorting the
battery pack terminals together may cause
burns or a fire.
■
Under abusive conditions, liquid may
be ejected from the battery pack; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery pack may cause
irritation or burns.
■
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries
may
behaviour resulting in fire, explosion, or
risk of injury.
■
Do not expose a battery pack or tool to fire
or excessive temperatures. Exposure to
fire or excessive temperature above 130°C
may cause explosion.
■
Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
OPERATION
■
Operate the product only at reasonable
hours – not early in the morning or late at
night when people might be disturbed.
■
Never operate the product in an explosive
atmosphere.
2
exhibit
unpredictable
■
Avoid using the product in bad weather
conditions especially when there is a risk
of lightning.
■
Do not operate in poor lighting. The
operator requires a clear view of the work
area to identify potential hazards.
■
Keep bystanders, children and pets 15 m
away from the area of operation. Stop the
product if anyone enters the area.
■
Operating similar tools nearby increases
both the risk of hearing injury and the
potential for other persons to enter your
working area.
■
Always be sure of your footing on slopes.
Walk, never run.
■
Keep all parts of your body away from
any moving part. Rotating impeller blades
can cause severe injury. Stop the product
and ensure impeller blades have stopped
rotating before removing the tubes, opening
or removing debris bag.
■
Keep proper footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
■
Never run the product without the proper
equipment attached, or without safety
devices, such as debris collector, in place.
■
Do not modify the product in any way or
use parts and accessories that are not
recommended by the manufacturer.
WARNING
If the product is dropped, suffers heavy
impact, or begins to vibrate abnormally,
immediately stop the product and inspect
for damage or identify the cause of the
vibration. Any damage should be properly
repaired or replaced by an authorised
service centre.
■
To reduce the risk of injury associated
with contacting rotating parts, always stop
the product and remove the battery pack.
Make sure all moving parts have come to a
complete stop before:
–
leaving the product unattended
–
clearing blockages or unclogging chute
–
checking, cleaning, or working on the
product
–
inspecting the product after striking a
foreign object
–
if the product starts to vibrate abnormally
(inspect immediately)
■
Immediately switch off and remove the
battery pack in the event of accident or
breakdown. Do not operate the product
Advertisement
