Leadshine Technology DM422C User Manual page 10

13. Professional Tuning Software ProTuner
Introduction
This section will provide an overview of connection and basic setup instructions for Leadshine's
digital stepping Drive DM422C using the ProTuner software. These instructions will walk you
through the following steps necessary to start up your Drive and motor. This section is intended for
setting up the Drive with the ProTuner.
Software Installation
The ProTuner is windows based setup software for tuning all the Leadshine's digital Drives includes
stepping Drive DM422C. It can run in windows systems, including Win95/Win98/WindowsNT/
Windows 2000/Windows XP. And the selected PC should have 1 serial port at least for
communicating with the Drive.
Double click "ProTuner_All_Setup_V1.0.exe" to begin installing the ProTuner. See Figure 11. Click
Next to enter the "License Agreement" window. See Figure 12.
Note: ProTuner_All_Setup_V1.0.exe can be used for all Leadshine digital drives. User can
get it from either Leadshine CD or website. Please get the latest version from
http://www.leadshine.com.
Figure 11: Begin to install the ProTuner
Tel: +000 0000-00000000
DM422C Digital Stepping Driver Manual V1.0
15
info@dold-mechatronik.de
Choose "I agree to the terms of this license agreement" and click Next to continue installation. The
user can enter user's information in the following window. See Figure 13. After entering the user's
information, click Next to select installation folder, where you would like to install the ProTuner. See
Figure 14.
Tel: +000 0000-00000000
www.dold-mechatronik.de
DM422C Digital Stepping Driver Manual V1.0
Figure 12: License agreement
Figure 13: User's information settings
16
Sarach 10 – D-77790 Steinach
Telefon: +49 7832 / 9744670
DOLD Mechatronik