Onboard Video; Network Interface Controllers - Acer Altos G900 User Manual

Acer desktop pc user's guide
Table of Contents

Advertisement

The mainboard provides active terminators, termination voltage,
resettable fuses, and protection diodes for both SCSI channels. You can
disable the onboard terminators in BIOS setup.

Onboard video

The mainboard incorporates an ATI RAGE XL PCI graphics accelerator
with 4 MB of video SDRAM that supports all standard IBM VGA modes.
The embedded SVGA video subsystem supports:
Pixel resolutions up to 1600 x 1200 under 2D and 1024 x 768 under
3D
CRT and LCD monitors up to 100 Hz vertical refresh rate
The mainboard supports disabling of the onboard video through BIOS
setup or when a plug-in video card is installed in any of the PCI slots.

Network interface controllers

Note: To ensure EMC product regulation compliance, the system
must be used with shielded LAN cables.
The mainboard includes two network interface controllers (NICs):
®
Intel
82550 NIC that supports 10Base-T and 100Base-TX networks
The 82550 controller supports the following features:
32-bit PCI, CardBus master interface
Integrated IEEE 802.3 10Base-T and 100Base-TX compatible
PHY
IEEE 820.3u auto-negotiation support
Chained memory structure similar to the 82559, 82558, 82557
and 82596
Full duplex support at both 10 Mbps and 100 Mbps operation
Low power +3.3 V device
IP checksum off-loading
NIC 1 can be used as both a network interface and server
management interface.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altos g901

Table of Contents