Tech Support; Warranty - A4Tech NB-20D User Manual

Notes:
The USB mouse pad cable can be used for to be plugged into and
out of the hole located in the front of the mouse pad , which can
provide you more convenience to save a lot space for your PC
desktop
Press "TUNE" Button to obtain frequency for best
performance.
(For 1st Time Use or Whenever the Battery Free Mouse is
relocated to another computer.)
When to Press the "TUNE" Button?
If your mouse cursor does not move, not moving smoothly, or when
the PWR LED (red) blinks, press the "TUNE" Button until the
frequency has been adjusted for the best performance, repeat the
process if needed.
How to Connect the Mouse Pad & Mouse?
1. Connect the mouse pad's USB cable to your computer USB
port.
2. Place the mouse on the center of the mouse pad, and Do Not
move the mouse. The PWR LED light should now remain lit.
3. Press the "TUNE" button.
4. PWR LED turns "Off" and the RUN LED light starts "Blinking".
5. When the Tuning Process is complete, the PWR and RUN LED
will return to their original mode.
Note:
1. Do not use this product on any metal table or surface. The
metal surface may interface with the cross induction frequency
and have an adverse effect on the mouse operation.
2. Don't keep credit card, ATM magnetic stripe card close to RFID
mouse-pad in order to prevent card from losing efficiency .
3. Keep working temperature at 0 to 50 degree Celsius (0°– 50°C)
4. Frequency: 121 KHz – 128KHz
5. Do not place the mouse pad too close to CRT monitor, keep a
distance of 20 cm
6. Do not worry having the memory stick card working on the pad
like a mouse without any damage

TECH SUPPORT

For tech support, please visit our website at
http://support.a4tech.com/ or email us at

WARRANTY

All A4 Tech products come with 2 years limited warranty.
support@a4tech.com