Specifications - Sony STR-ZA810ES Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 20 Hz – 20,000 Hz; rated
90 watts per channel minimum RMS power, with no more than 0.09%
total harmonic distortion from 250 milliwatts to rated output.
1) 2)
Amplifier section
Rated Power Output at Stereo Mode
(6 ohms, 20 Hz – 20 kHz, THD 0.09%): 90W + 90 W
Reference Power Output at Stereo Mode
(8 ohms, 20 Hz – 20 kHz, THD 0.09%): 70W + 70 W
Reference Power Output
(6 ohms, 1 kHz, THD 0.9%)
FRONT: 110 W + 110 W
CENTER: 110 W
SURROUND: 110 W + 110 W
SURROUND BACK: 110 W + 110 W
Reference Power Output
(8 ohms, 1 kHz, THD 0.9%)
FRONT: 100 W + 100 W
CENTER: 100 W
SURROUND: 100 W + 100 W
SURROUND BACK: 100 W + 100 W
Reference Power Output at Surround Mode
(6 ohms, 1 kHz, THD 0.9%): 140 W per channel
1) Measured under the following conditions:
Power requirements: 120 V AC, 60 Hz
2)
Depending on the sound field settings and the source, there may be
no sound output.
3)
Reference power output for front, center, surround, surround back
speakers.
3)
Frequency response
Analog
10 Hz – 100 kHz, ±3dB (When [Direct] is being used and an analog
input is selected.)
Input
Analog
Sensitivity: 500 mV/50 kilohms
4) 5)
S/N : 105 dB (A, 500 mV )
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB (A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB (A, 20 kHz LPF)
Output (Analog)
ZONE 2
Voltage: 2 V/1 kilohm
SUBWOOFER
Voltage: 2 V/1 kilohm
Equalizer
Gain levels
±10 dB, 1 dB step
4)
INPUT SHORT (with sound field and equalizer bypassed)
5)
Weighted network, input level
FM tuner section
Tuning range
87.5 MHz – 108.0 MHz (100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
continued
23
US