Operation; Front Panel Layout; Operation Instruction - Kedr MIG 160GDM User Manual

4 Operation

4.1 Front panel layout

 MIG 180GDM
1
Front panel instruction.
1 - Data selection button
2 - Multifunctional data adjusting knob
Coarse adjustment by pressing and turning the knob.
Fine adjustment by turning the knob directly.
3 - Welding mode switch key.
Select the welding mode as MMA, TIG, MIG (CO
4 - Multifunctional data display

4.2 Operation instruction

The starting up display

Switch on the welding power source, the front panel displays as Fig. 1. After the【Welding
current display】(or press any key or knob on front panel) flashes for 5 seconds, the machine
enters into the welding mode that saved in the last shutdown.
2
Fig. 1: the starting-up display interface
) and MIG (MIX).
2
4
3
13