1. Manuals
  2. Brands
  3. BESTEK Manuals
  4. Firewall
  5. NSP-2C62
  6. User manual

BESTEK NSP-2C62 User Manual

Network security system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Security System
NSP-2C62
Always at the forefront of innovation
User Manual
1

Advertisement

Table of Contents
loading

Related Manuals for BESTEK NSP-2C62

Summary of Contents for BESTEK NSP-2C62

  • Page 1 Network Security System NSP-2C62 Always at the forefront of innovation User Manual...

  • Page 2: Copyright

    Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transformation adaptation without the prior written permission from the copyright holders. This publication is provided for informational purposes only.

  • Page 3: Warranty

    Warranty 1. Warranty does not cover damages or failures that are raised from misuse of the product, inability to use the product, unauthorized replacement or alteration of components and product specifications. 2. The warranty is void if the product has been subject to physical abuse, improper installation, modification, accidents or unauthorized repair of the product.

  • Page 4: Safety Measures

    Safety Measures To avoid damage to the system: • Use the correct AC input voltage range. To reduce the risk of electric shock: • Unplug the power cord before removing the system chassis cover for installation or servicing. After installation or servicing, cover the system chassis before plugging the power cord.

  • Page 5: Table Of Contents

    Table of Content Copyright ................................2 Trademarks ................................2 FCC and DOC Statement On Class A ........................2 Warranty ................................. 3 Static Electricity Precautions ..........................3 Safety Measures ..............................4 Before Using the System Board ..........................4 Table of Content ..............................5 Chapter 1 General Information 1.1 Main Feature ..............................

  • Page 6: Chapter 1 General Information

    Chapter 1 General Information...

  • Page 7: Main Feature

    1.1 Main Feature Processor Performance NSP-2C62 is a 2U Rack Mount Network Security System that, pre-installed with BNX-C602 security board, featuring on Intel® C602 PCH, supporting dual Intel® Xeon® LGA2011 E5-2600 V2 processors, of 22nm Ivy Bridge architecture, with maximum up to 12 processor cores and 30MB Smart Cache. Niche of such a new combination allows more direct writing data of a portion of processor cache to HDD or SSD, bypassing the memory.

  • Page 8: Specifications

    1.2 Specifications Core Engine Chipset Intel® C602 PCH Processor Support Dual Intel® E5-2600 v2 Processor Memory 8x DDR3 1066/1333/1600MHz ECC/Non-ECC DIMM, 4 Channel Up to 64GB UDIMM Memory or 256GB RDIMM Display AST2300 Ethernet Controller 4x Onboard Intel® 82574L GbE Controllers 1x 10/100 Management Port 2x 2.5”...

  • Page 9: System Layout

    1.3 System Layout Figure 1.1: System Layout of NSP-2C62...

  • Page 10: Indicators And Features

    1.4 Indicators & Features ► Front View ► Rear View...

  • Page 11: Chapter 2 Preparation

    Chapter 2 Preparation...

  • Page 12: Before You Begin

    2.1 Before You Begin A stable and clean working environment are essential. Dust and dirt can get into components and cause a malfunction. Use containers to keep small components separated. Adequate lighting and proper tools can prevent you from accidentally damaging the internal components. Most of the procedures that follow require only a few simple tools, including the following: A Philips screwdriver ...

  • Page 13: Open Up Top Cover

    This is the first step of all to proceed with, if you are to install (or change) a processor (hard drive or memory module). Please remove the 6 screws on the two sides as indicated in the places below, prior to any moving of the top cover.

  • Page 14: Accessing Processor

    2.4 Accessing Processor The built-in BNX-C602 server board supports only LGA2011 E5-2600 V2 processor. Below is a list of some compatible processors: Code Core Speed Cache Thermal E5-2603 V2 1.8GHz 10MB E5-2609 V2 2.5GHz 10MB E5-2620 V2 2.1GHz 15MB Procedures: (1) To install processor into LGA2011 socket, please find the CPU socket on BNX-C602 server board (as indicated below): If there is only one CPU to be installed, please install on CPU0.

  • Page 15: Accessing Memory

    2.5 Accessing Memory The built-in BNX-C602 server board supports eight DDR3 ECC memory module, enabling dual/quad-channel architecture. This however requires a specific placement of some appropriate number of memory modules (ideally, at least two are needed for dual-channel, and four for quad-channel). The memory modules are installed into matching banks, as a way to be placed in separate channels, allowing the memory controller access to each memory module at the same time, as a consequence of bandwidth increase accordingly and proportionally.

  • Page 16: Adding 2.5"/3.5" Sata Hard Drive

    2.6 Adding 2.5”/3.5” SATA Hard Drive Procedures: (1) Turn off the system and open up the top cover. (2) Locate the drive bay brackets. (3) Remove the four screws at the red circles to detach the drive bay bracket. ...
  • Page 17 (4) Remove the four screws on the top of drive bay bracket to disassembly the hard drive bracket. (5) To add a 2.5” hard drive, integrate 2.5” hard drive into the 2.5” hard drive bracket and add four screws to secure it.

  • Page 18: Accessing Expansion Card

    2.7 Adding Expansion Card Procedures: (1) Turn off the system and open up the top cover. (2) Select one of the slots as below where a card is to be added, for instance, PCIe V3.0 X8 slot. (3) Remove the front 2 bracket screws to acquire the bracket. (4) Attach the PCIe card onto this bracket and add two screws to complete the assembly.

  • Page 19: Chapter 3 Operation

    Chapter 3 Operation...

  • Page 20: Turning On The System

    Power Switch to turn on the system. Power Redundancy In some cases, NSP-2C62 would come with one 2U redundant power that has two independent power modules, with each of them capable of sustaining the entire system operation alone. The standard redundancy of this power supply would trigger the internal audible alarm in the light of various...
  • Page 21 Power LED The power LED (PWR) can be found at front panel (left of the three) and shall come lit constant ON at system start. Hard Drive LED The hard drive LED (HDD) can be found at front panel (middle of the three) and shall blink in the wake of any SAS hard drive activity.

  • Page 22: Installing Operating System & Drivers

    3.2 Installing Operating System & Drivers Confirm the Hard Drive List The system is designed to allow booting from a variety of internal devices, including USB pen drive, SATA drive, and SAS drive, etc. Given the tiny footprint and slow performance of USB pen drive, SAS/SATA drive and SATADOM are more likely the targets to carry operating system and can be found in the detected drive list, in the section of SATA/SAS Configuration.

  • Page 23: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup...
  • Page 24 About the BIOS The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor your system to suit your individual work needs. It is a ROM- based configuration utility that displays the system’s configuration status and provides you with a tool to set system parameters.

  • Page 25: Entering Setup

    4.1 Entering Setup When the system is powered on, the BIOS will initiate the Power-On-Self-Test (POST) routines. These routines perform various diagnostic checks. If an error is encountered, the error will be reported in one of two different ways: If the error occurs before the display device is initialized, a series of beeps will be transmitted. If the error occurs after the display device is initialized, the screen will display the error message.

  • Page 26: The Main Menu

    4.4 The Main Menu Figure 4-1: BIOS Setup Utility Main Menu The menu bar on the top of the first screen has the following submenus:  Main: Basic system configuration.  Advanced: Advanced system settings.  Chipset: Configure the function of North Bridge and South Bridge. ...
  • Page 27 BMC Information BMC Firmware Version Display version number of the Firmware setup utility. SDR Reversion Display the SDR reversion information. FRU Version Display the FRU reversion information. Processor Information CPU Type/ Max CPU Speed/ CPU Signature / Processor Cores / Microcode Patch Displays the technical specifications for the installed processor.

  • Page 28: The Advanced Menu

    4.5 The Advanced Menu In this section, you may set the configurations for the following items: PCI Subsystem Settings, Runtime Error Logging, CPU Configuration, FAN Configuration, USB Configuration, SATA Configuration, SAS Configuration, Info Report Configuration, Super IO Configuration, Serial Port Console Redirection, and Network Stack.
  • Page 29 PCI Subsystem Setting PCI Express Slot 1/2/3/4 I/O ROM When enabled, this setting will initialize the device expansion ROM for the related PCI-E slot. Options available: Enabled/Disabled. Default setting is Enabled. Onboard LAN1/2 Controller Enable/Disable Onboard LAN controllers. Options available: Enabled/Disabled. Default setting is Enabled. Onboard LAN I/O ROM Option Configure onboard LAN devices and initialize device expansion ROM.
  • Page 30 VGA Platte Snoop Enable/Disable VGA Palette register Snooping. Options available: Enabled/Disabled. Default setting is Disabled. PERR Generation When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI. Options available: Enabled/Disabled. Default setting is Disabled. SERR Generation When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI.
  • Page 31 PCI Express Setting PCI Express Device Register Settings Relaxed Ordering Enable/Disable PCI Express Device Relaxed Ordering feature. Options available: Enabled/Disabled. Default setting is Disabled. Extended Tag When this feature is enabled, the system will allow device to use 8-bit Tag field as a requester. Options available: Enabled/Disabled.
  • Page 32 Link Training Retry Define the number of Retry Attempts software will take to retrain the link if previous training attempt was unsuccessful. Press <+> / <-> keys to increase or decrease the desired values. Link Training Timeout (us) Define the number of Microseconds software will wait before polling 'Link Training' bit in Link Status register. Press <+>...
  • Page 33 # CPU Configuration...
  • Page 34 CPU Information Socket 0/1 CPU Information CPU Type/ Signature / Microcode Patch / Max CPU Speed / Min CPU Speed / Processor Cores / Intel HT Technology / Intel VT-x Technology Displays the technical specifications for the installed processor. Intel HT Technology / Intel VT-x Technology Displays the support information for the installed processor.
  • Page 35 Limit CPUID Maximum When enabled, the processor will limit the maximum COUID input values to 03h when queried, even if the processor supports a higher CPUID input value. When disabled, the processor will return the actual maximum CPUID input value of the processor when queried.
  • Page 36 # CPU Power Management Configuration CPU Power Management Configuration Power Technology Configure the power management features. Options available: Disable/Energy Efficient/Custom. Default setting is Custom. EIST (Enhanced Intel SpeedStep Technology) Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low levels in response to processor load.
  • Page 37 CPU C3/C6 Report (Note) Allows you to determine whether to let the CPU enter C3/C6 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. The C3/C6 state is a more enhanced power-saving state than C1.
  • Page 38 # Fan Configuration Fan Control Policy Define the fan policies. Options available: Full Speed/Performance/Balanced/Quiet. Default setting is Balanced. Fan Rise Curve Press <+> / <-> keys to increase or decrease the desired values.
  • Page 39 # USB Configuration USB Configuration Legacy USB Support Enables or disables support for legacy USB devices. Options available: Auto/Enabled/Disabled. Default setting is Enabled. USB3.0 Support Enables or disables onboard USB 3.0 devices. Options available: Enabled/Disabled. Default setting is Enabled. XHCI Hand-off Enable/Disable EHCI (USB 3.0) Hand-off function.
  • Page 40 # SATA Configuration...
  • Page 41 SATA Configuration SATA Port 0/1/2/3/4/5 Displays the installed HDD devices information. System will automatically detect HDD type. (Note) This item is will not appear when the SATA mode is set ot RAID mode. SATA Mode Selection Select the on chip SATA type. IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the IDE emulation mode.
  • Page 42 # SAS Configuration SAS Configuration SAS Port 0/1/2/3 Press [Enter] to view the installed HDD devices. (Note) The number of SATA and SAS devices depends of the PCH SKU.
  • Page 43 # Info Report Configuration Info Report Configuration Post Report Post Report Enable/Disable Post Report support. Options available: Enabled/Disabled. Default setting is Enabled. Error Message Report Info Error Message Enable/Disable Info Error Message support. Options available: Enabled/Disabled. Default setting is Disabled.
  • Page 44 # Super IO Configuration...
  • Page 45 Super IO Configuration Super IO Chip Display the model name of Super IO chipset. Serial Port 0/1 Configuration Serial Port When enabled allows you to configure the serial port settings. When set to Disabled, displays no configuration for the serial port. Options available: Enabled/Disabled.
  • Page 46 # Serial Port Console Redirection...
  • Page 47 COM1/COM2/Serial Port for Out-of Band Management / Windows Emergency Management Service (EMS) Console Redirection Select whether to enable console redirection for specified device. Console redirection enables users to manage the system from a remote location. Options available: Enabled/Disabled. Default setting is Disabled. (Note) Advanced items prompt when this item is defined.
  • Page 48 Parity A parity bit can be sent with the data bits to detect some transmission errors. Even: parity bi is 0 if the num of 1's in the data bits is even. Odd: parity bit is0if num of 1's the data bits is odd. Mark: parity bit is always 1.
  • Page 49 # Network Stack Network stack Enable/Disable UEFI network stack. Options available: Enabled/Disabled. Default setting is Disabled.
  • Page 50 Intel® 82574L Gigabit Network Connection...
  • Page 51 PORT CONFIGURATION MENU NIC Configuration Link Speed Change link speed duplex for current port. Options available: AutoNeg/10Mbps Half/10Mbps Half/10Mbps Half/100Mbps Full. Default setting is AutoNeg. Wake On LAN Enable/Disable Wake On LAN feature. Options available: Enabled/Disabled. Default setting is Enabled. Blink LEDs (range 0-15 seconds) Blink LEDs for the specified duration (up to 15 seconds).

  • Page 52: The Chipset Menu

    4.6 The Chipset Menu # North Bridge...
  • Page 53 IOH Configuration Press [Enter] for configuration of advanced items. QPI Configuration Press [Enter] for configuration of advanced items. Compatibility RID Enable/Disable Compatibility RID function. Options available: Enabled/Disabled. Default setting is Enabled. Memory Configuration Total Memory Displays the total capacity of the installed memory. Current Memory Mode Displays the current memory mode.
  • Page 54 Patrol Scrub Enable/Disable Patrol Scrub function. Options available: Enabled/Disabled. Default setting is Enabled. Demand Scrub Enable/Disable Demand Scrub function. Options available: Enabled/Disabled. Default setting is Disabled. Data Scrambling Enable/Disable Data Scrambling function. Options available: Enabled/Disabled. Default setting is Enabled. Device Tagging Enable/Disable Device Tagging function.
  • Page 55 # IOH Configuration IOH Configuration Intel® VT for Directed I/O Configuration Press [Enter] for configuration of advanced items.
  • Page 56 Intel® I/OAT (Intel I/O Acceleration Technology) Enable/Disable Intel I/OAT function. Options available: Enabled/Disabled. Default setting is Disabled. DCA Support (Direct Cache Access) Enable/Disable Intel DCA Support function. Options available: Enabled/Disabled. Default setting is Disabled. VGA Priority Define the display device priority. Options available: Onboard/Offboard.
  • Page 57 # QPI Configuration Current QPI Link Speed/ Current QPI Link Freq Displays the current QPI Link Speed and Frequency information. Isoc Enable/Disable Isoc. Options available: Enabled/Disabled. Default setting is Disabled. QPI Link Speed Mode Configure QPI Link Speed mode. Options available: Fast/Slow. Default setting is Fast. QPI Link Frequency Select Configure QPI Link Frequency.
  • Page 58 # DIMM Information CPU Socket 0/1 DIMM Information CPU Socket 0: DDR3_P0_A0/DDR3_P0_B0/DDR3_P0_C0/DDR3_P0_D0 Status The size of memory installed on each of the DDR3 slots. CPU Socket 1: DDR3_P1_E0/ DDR3_P1_F0/ DDR3_P1_G0/DDR3_P1_H0Status The size of memory installed on each of the DDR3 slots.
  • Page 59 # South Bridge Configuration PCH Information Name/Stepping Information Displays the name and stepping information of the south bridge. SB Chipset Configuration PCH Compatibility RID Enable/Disable PCH Compatibility RID support. Options available: Enabled/Disabled. Default setting is Disabled. USB WakeOnDev insertion Enable/Disable USB Device WakeOn support. Options available: Enabled/Disabled.
  • Page 60 Onboard SAS OpROM Enable/Disable onboard SAS option ROM. Options available: Enabled/Disabled. Default setting is Enabled. Audio Configuration Azalia HD Audio Enable/Disable onboard HD audio device. Options available: Enabled/Disabled. Default setting is Enabled. Azalia internal HDMI codec Enable/Disable onboard HDMI codec support. Options available: Enabled/Disabled.
  • Page 61 # Intel ME Subsystem Configuration ME Subsystem Configuration Enable/Disable ME subsystem configuration. Options available: Enabled/Disabled. Default setting is Enabled.

  • Page 62: The Security Menu

    4.7 The Security Menu There are two types of passwords that you can set: • Administrator Password Entering this password will allow the user to access and change all settings in the Setup Utility. • User Password Entering this password will restrict a user’s access to the Setup menus. To enable or disable this field, an Administrator Password must first be set.
  • Page 63 # Secure Boot Menu Secure Boot menu Platform Mode Display the System Platform Mode State. Secure Boot Display the status of Secure Boot. Secure Boot Control Enable/Disable Secure Boot function. Options available: Enabled/Disabled. Default setting is Enabled. Secure Boot Mode Secure Boot requires all the applications that are running during the booting process to be pre-signed with valid digital certificates.
  • Page 64 # Image Execution Policy Image Execution Policy This item appears only when the Secure Boot Mode is set to Custom. Image Execution policy Internal FV Image Execution Policy per device path on Security Violation. Options available: Always Execute. Default setting is Always Execute. Option ROM Image Execution Policy per device path on Security Violation.
  • Page 65 # Key Management Image Execution Policy per device path on Security Violation. Options available: Always Execute/Always Deny/Allow Execute/Defer Execute/ Deny Execute/ Query User. Default setting is Deny Execute. Key Management This item appears only when the Secure Boot Mode is set to Custom. Factory Default Key Provisioning Force the system to Setup Mode.
  • Page 66 Key Exchange Key Database (KEK) Display the status of Platform Key. Delete KEK Press [Enter] to delete the KEK from your system. Set new KEK Press [Enter] to configure a new KEK. Append Var to KEK Press [Enter] to load additional KEK from a storage device for an additional db and dbx management. Authorized Signature Database (DB) Display the status of Authorized Signature Database.

  • Page 67: The Server Management Menu

    4.8 The Server Management Menu OS Watchdog Timer Enable/Disable OS Watchdog Timer function. Options available: Enabled/Disabled. Default setting is Disabled. OS Wtd Timer Timeout Configure OS Watchdog Timer. Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is 10 minutes. OS Wtd Timer Policy Configure OS Watchdog Timer Policy.
  • Page 68 # BMC LAN Configuration Lan Channel 1 Configuration Source Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option willnot modify any BMC network parameters during BIOS phase. Options available: Static/Dynamic/Do Nothing. IP Address Display IP Address information. Subnet Mask Display Subnet Mask information.
  • Page 69 # Gbt BMC Function Select NCSI and Dedicated LAN Switch NCSI and dedicated LAN and send KCS command. Options available: Mode2(NSCI)/ Mode1 (Dedicated). Default setting is Mode1 (Dedicated).
  • Page 70 # System Event Log Enabling/Disabling Options SEL Components Change this to enable or disable all features of System Event Logging during boot. Options available: Enabled/Disabled. Default setting is Enabled. Erasing Settings Erasing SEL Choose options for erasing SEL. Options available: No/Yes, On next reset/Yes, On every reset. Default setting is No. When SEL is Full Choose options for reactions to a full SEL.

  • Page 71: The Boot Menu

    4.9 The Boot Menu Boot Configuration Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting." Press the number keys to input the desired value. Bootup NumLock State Enable or Disable Bootup NumLock function. Options available: On/Off.
  • Page 72 Boot Priority Order Boot Option #1/#2/#3/#4 Press Enter to configure the boot priority. By default, the server searches for boot devices in the following secquence: 1. UEFI device. 2. Hard drive. 3. Network device. 4. Removable device Network Device BBS Priorities Press Enter to configure the boot priority.
  • Page 73 # CSM16 Parameters CSM16 Parameters CSM16 Module Version Display CSM Module version information. Gate20 Active Upon Request: GA20 can be disabled using BIOS services. Always: Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Options available: Upon Request/Always.
  • Page 74 # CSM Parameters CSM parameters Press Enter to configure the advanced items. Launch CSM (Compatibility Support Module) Enable/Disable Compatibility Support Module (CSM) launch. Options available: Enabled/Disabled. Default setting is Enabled. Boot option filter Determines which devices system will boot to. Options available: UEFI and Legacy/Legacy only/UEFI only.

  • Page 75: The Save & Exit Menu

    4.10 Exit Menu Save Changes and Exit Saves changes made and close the BIOS setup. Options available: Yes/No. Discard Changes and Exit Discards changes made and close the BIOS setup. Options available: Yes/No. Save Options Save Changes Saves changes made in the BIOS setup. Options available: Yes/No.

  • Page 76: Chapter 5 Q&A

    Chapter 5 Q & A...
  • Page 77 Q: The power switch is pressed, but nothing happens. A: Please check the following before you call out for help: (1) Loose AC Power Cord => Push again. (2) Loose power cable (both 24-pin and 4-pin) => Push again. (3) A bad or loose power switch => Reseat the power switch on the header again. Q: I can turn on the power, but the motherboard does not boot.
  • Page 78 Q: System does not boot from USB CD-ROM/DVD-ROM A: Please check the following before you call out for help: (1) USB CD-ROM/DVD-ROM is not plugged on USB port. (2) Check in the BIOS that CD-ROM/DVD-ROM has not been detected. (3) Check in the BIOS that CD-ROM/DVD-ROM has not been selected as the first boot device. (4) Unadvised misuse: Some OS installation CD/DVDs, such as Microsoft Windows, have a few seconds waiting time for a keyboard press which triggers the system to boot from the CD-ROM/DVD-ROM.
  • Page 79 Q: I cannot connect my network with internet A: Please consult your system administrator to confirm if a static network environment with security port designation has been deployed. Otherwise, mostly, reassuring to have Windows acquiring IP address automatically would be suggested and should resolve the situation. Please be referred to your system administrator for any further network configuration setting.

Table of Contents