Extension Tubes - Canon EF16-35mm f/2.8L II USM Instruction

The EW-88 hood can keep unwanted light out
the lens, and also protects the front of the lens
from rain, snow, and dust.
To attach the hood, align the hood's attachment
position mark with the red dot on the front of
lens, then turn the hood as shown by the arrow
until the lens' red dot is aligned with the hood's
stop position mark.
The hood can be reverse-mounted on the lens
for storage.
U .
Part of the picture may be blocked if the hood is
not attached properly .
• When attaching or detaching the hood, grasp
the base of the hood to turn it. To prevent
deformation, do not grasp the rim of the hood to
turn it.
You can attach filters to the filter mounting thread
on the front of the lens.
U .
To ensure dust- and water-resistant
performance, attach a Canon PROTECT
(82mm) .
• Only one filter may be attached .
• If you need a polarizing filter, use the
Circular Polarizing Filter (82mm).
of
the

8. Extension Tubes

(Sold separately)
You can attach Extension Tube EF12 II or
II for magnified shots. The shooting distance and
magnification are shown below.
filter
Canon
16mm
EF12 II
35mm 202
16mm
EF25 II
35mm 195
aJ
Manual focusing is recommended
focusing.
EF25
Far
0.36x
0.8ox
for accurate