Analysis Data Length Setup - ONOSOKKI DS-2000 series Operation Manual

3. Analysis Data Length Setup

Set an analysis time length (number of sampling points) which equals the FFT time-window length.
Initial setup: 2048
○ "Input" menu - "Set" tab of "Sampling"
Select the number of
sampling points.
The number of sampling points equals the number
of data points N of a time waveform.
The number of points L for frequency spectrum
resolution changes according to the number of
sampling points as follows:
L = N/2.56
For example, when the number of data points is
2048, the number of points for frequency
resolution is 800 lines.
‹ Related help
DS-0221/0222 Help "Command Reference" - "Input" menu - "Sampling"
4