Shindaiwa B530 Owner's Manual page 17

10 Hour Maintenance
Perform more frequently in dusty or
dirty conditions.
 Remove and clean the cylinder cover and
clean grass and dirt from the cylinder
fins.
CAUTION!
Do not operate the machine if the air
cleaner or element is damaged, or if
the element is water-soaked.
10/15 Hour Maintenance
Remove and clean the spark plug. Ad-

just the spark plug electrode gap to 0.6
- 0.7mm. If the plug must be replaced,
use only NGK BMR6A.
Keep the spark plug wire connections

tight and clean.
CAUTION!
Before removing the spark plug, clean
the area around the plug to prevent dirt
and dust from getting into the engine's
internal parts.
Turn Counterclockwise
To Remove
50 Hour Maintenance
Perform more frequently in dusty or
dirty conditions.
 Remove the cutting attachment and the
gear shaft collar, and press new grease
into the gear case until the old grease
has been pushed out. Use only lithium
base grease (such as Shindaiwa Gear
Case Lubricant).
Air Filter
Fuel Filter Maintenance
Use a hooked wire to extract the
fuel filter from inside the fuel tank.
Remove and replace the filter ele-
ment. Before reinstalling the filter,
inspect the condition of the fuel
line. If damage or deterioration are
noted, the unit should be removed
from service until you can con-
sult with an authorized servicing
dealer.
CAUTION!
Make sure you do not pierce the fuel
line with the end of the hooked wire.
The line is delicate and can be dam-
aged easily.
Spark Plug
Hooked
Wire
17