Photo Mode; Capturing Photo; Photo Settings - GitUp F1 User Manual

EIS (Electronic Image Stabilization):
and stable in situations where the camera is subject to knocks and
bumps. The options for this setting are On and Off (Default).
Note: Only available in 1080P@ 60fps, 1080P@ 50fps, 1080P@ 30fps,
1080P@25fps.
Audio: Turn On/Off the audio.
Calib(Calibration): It applies software correction to the lens distortion
before it saves the footage file to the memory card.

Photo Mode

Capturing Photo

1. Press the Power/Mode button [
photo mode.
2. Press the shutter button [

Photo settings

When in the photo mode, press the Menu button [
setting. Press the Shutter/Select button [
options within a setting. Use the Power/Mode button [
through the settings.
EIS helps the footage stay clear
] repeatedly until you get to
] to take a photo.
] to enter photo
] to cycle through the
] to cycle
-9-
Mode: Photo mode contains four capture modes: Normal, Bust, Timer,
Time Lapse capture.
Normal Captures a single photo.
Enables you to take multiple images over a set
Burst
number of seconds. Perfect for capturing the
definitive moment in fast-action sports.
Press the Shutter/Select button, camera begins
Timer
count down andcapture a picture within setting
time.
Captures a series of photos at specific intervals.
Time Lapse
Note: The Photo mode icon will appear in the upper left on your
camera status screen.
Rate (only available in Bust mode):
every second, the available options are 3, 5, and 8 photos every
second.
Timer (only available in Timer mode):
options are 3s, 5s, 10s and 15s.
Interval (only available in Time Lapse mode):
your camera take photos at set time intervals, creating a video with
stitched photos.
Set the number of photos taken
Set the time of the timer, the
Time Lapse Photo lets
-10-