Powering On/Off; Camera Status Screen; Camera Modes - GitUp F1 User Manual

Powering On/Off
To Power On: Press and hold the Power/Mode button [
seconds.
To Power Off: Press and hold the Power/Mode button [
seconds.
PRO TIP:
When the camera is off and Quik Rec is enabled, you can turn
the camera on and immediately begin capturing video or Time Lapse
photos just by pressing the Shutter/Select button [
video, press and hold for Time Lapse photos. Press again to stop
recording and power off the camera. For details, see Quik Rec in Setup
Mode.

Camera Status Screen

F1 features a status screen that displays the following information
about modes and settings:
1
4K 30
2
02
3
1h:04
4
] for four
] for three
]. Press once for
1min
-3-
1

Camera Modes

2
Resolution/fps
(frames per second)
3
Number of Files Captured
Note:
The icons that appear on the camera status screen vary by
mode.
Camera Modes
The F1 features several camera modes. To cycle through the modes,
press the Power/Mode button [
5
6
7
4
5
6
7
] repeatedly.
Video Record video or time lapse video.
Photo Capture a single photo or a series of photos.
Playback videos and photos. (Playback mode
Playback
appears only if the camera is connected to a TV).
SetUp Adjust general camera settings.
-4-
Left recording time
Meter
Loop Recording Interval
Battery Life