Video Mode; Capturing Video; Video Settings - GitUp F1 User Manual

Video Mode

Capturing Video

1. Press the Power/Mode button [
mode.
2. Press the shutter button [

Video Settings

When in the video mode, press the Menu button [
setting. Press the Shutter/Select button [
options within a setting. Use the Power/Mode button [
through the settings.
Mode: Video mode contains four capture modes: Looping, Normal,
Time Lapse, Slow motion and Vid+Photo. Each Video mode has its
own settings menu.
] repeatedly until get to Video
] to start/stop recording.
] to enter video
] to cycle through the
] to cycle
-5-
Normal Captures video.
Creates video from frames
Time Lapse
captured at specific intervals.
Creates Slow Motion video, only available
SLOMO
in 1080P@100fps, 1080P@120fps and 720P
(Slow Motion)
@ 200fps, 720p@240fps mode.
Simultaneously captures both video and
Vid+Photo
photos.
Lets you continuously record and save
only the best moments, which helps to
Looping
conserve space on your microSD card.
Note: The video mode icon will appear in the upper left on your
camera status screen.
Res (Resolution): Set the resolution of the video, resolution refers to
the number of horizontal lines in the video. The F1 includes the video
resolutions listed below:
-6-