Headless Mode; One Key Return; Changing The Blades - Quadrone Sparrow Instruction Manual

• When in Headless Mode, no matter what direction
the quadcopter faces, it will respond according to
the direction pushed on the remote. (Forward on
the remote will make the quadcopter fly forward,
even if it is pointing in another direction.) To enter
Headless Mode, land the Quadrone on a flat
surface. Press the Headless Mode button. The
remote will beep and the lights on the quad will
begin to flash. To exit Headless Mode, simply press
the button again. The remote will beep again and
all lights will remain on and return to normal.
•
When One-Key Return, no matter what direction the
quadcopter faces, the pilot will simply have to pull the
Directional Joystick back and the quadcopter will fly back
to the remote. To enter One-Key Return press the
One-Key Remote button. The remote will beep and the
lights on the quad will begin to flash. To exit One-Key
Return, press the button again or press forward on the
Directional Joystick. The remote will beep again and all
lights will remain on and return to normal.
• If a blade breaks or falls off your Quadrone during a crash, it will be up
to you to repair it. Simply push one of the extra blades onto the
exposed motor. It is important for the correct blade to be put on the
correct motor or the drone will not fly correctly. A letter is marked on
each blade to indicate which motor it should go on.
See diagram below:
A
B

Headless Mode

One-Key Return

Changing the Blades

B
A
9
A