Advertisement
Quick Links
Download this manual
See also:
User Manual
Thank you for purchasing a Leak Gopher and the Philio Mini Gateway. We hope this Quick Start Guide
will help you get going and you home or business protected.
Let's outline what we are going to do...
1. Set up your Philio Gateway. The Philio Gateway allows you to connect to Z-Wave devices in your
house to monitor for leaks, turn off the water automatically and do all kinds of other cool stuff
by adding other Z-Wave devices.
2. Connect your Philio Gateway to your home wireless network so you can operate your devices
from anywhere.
3. Include the Leak Gopher Valve Control, the Leak Gopher Water Sensor, and other Z-Wave
devices in your Z-Wave network.
4. Learn how to Exclude a Z-Wave device just in case you need to know how.
5. Create Scenes to control the Leak Gopher Valve with the push of a button.
6. Create a Macro to have the Philio Gateway monitor your water sensors and turn off the water if
a leak is detected.
1. Setting up the Gateway
Plug the PSC05 into a USB/120VAC adapter
Plug the USB/120VAC adapter into 120VAC outlet
Go to Wi-Fi settings and choose the PSC05 as your wireless network
The password is 12345678
Exit Wi-Fi settings
Download the Philio Home Mate App and install in on your telephone
Open the Philio Home Mate App
Press + Gateway to add your Gateway
Press QR Code
Scan the QR code on the back of the PSC05 with your phone
The Gateway ID is admin
The Gateway password is 888888
Enter the Gateway ID and password
Press Confirm
Philio PSC05 Mini Z-Wave Gateway
Quick Start Guide
Advertisement
Related Manuals for Philio PSC05
Summary of Contents for Philio PSC05
- Page 1 4. Learn how to Exclude a Z-Wave device just in case you need to know how. 5. Create Scenes to control the Leak Gopher Valve with the push of a button. 6. Create a Macro to have the Philio Gateway monitor your water sensors and turn off the water if a leak is detected.
- Page 2 Changing from AP Mode to STA Mode Press the Settings Icon in the top right – looks like three gears Press Setting Press the blue link that says AP Mode – PSC05-XX:XX:XX:XX:XX:XX A screen will pop up Press STA Mode If you get this message “Error getting SSID listing”...
- Page 3 Plug the valve into the bottom of the Leak Gopher Start the Home Mate APP Press the Gateway that was just added i.e. Gateway 1 Press the Sensors button at the bottom left – note there are no devices Press the Settings Icon in the top right – looks like three gears Press Include Device The Screen displays Setting Mode of Gateway After a few seconds the screen displays Including Devices and starts counting down in seconds...
- Page 4 If the valve was open it will close Now you have the valve in sync with the APP. Try it some more. Press on and off. Notice valve takes about 9 seconds to open or close. It is not a bad idea to give the valve time to complete its transition before pressing the rocker switch the other way.
- Page 5 You will notice that the Gateway has s Home Security Alarm area at the top of the screen. It is outside the scope of this Quick Start Guide to cover this area of operation. For more information on the Home Security Alarm capabilities of the PSC05 visit www.Philio.com. Press the + below the Home Security Alarm section of the screen A window to Add New Title will appear.
- Page 6 Leak Gopher acknowledged that it received and executed the command. The at this time the Philio PSC05 Mini Gateway does not support the Z-Wave Alert Class to verify the vale has indeed closed. The Leak Gopher does support this class and has two limit switches to verify the position of the valve or Alert the controller that it cannot confirm if the valve is open or closed.
- Page 7 include your Leak Gopher Water Sensor into your Z-Wave network. These instructions should work well with any water sensor but our example is using the Leak Gopher Water Sensor. Now you have a Leak Gopher Water Sensor and a Leak Gopher Valve Control and you can see them under the Sensors screen.
- Page 8 Remember to open the valve before you install it or you may not remember why you don’t have any water! The Philio Mini Gateway has many more really cool capabilities that are outside the scope of this Quick Start Guide. Please contact www.Philio.com...
Need help?
Do you have a question about the PSC05 and is the answer not in the manual?
Questions and answers