Service Call Q & A - Wireless Remote Control - Hitachi RAC-25WPB Service Manual

Wireless remote control
Q1
The timer will not become set.
Q2
The current time display will
disappear at once.
Q3
I made a timer "reservation". But
the time setting has disappeared.
I tried to set the "sleep" timer
Q4
while the ON timer is reserved.
But it will not set itself to a desired
time.
A1
Have you set the product to the current time? The
timer cannot be set unless it is set to the current
time.
The current time
A2
disappears 10 seconds
later. The timer set
display is given priority.
A3
Is the time not past the reserved time?
The set time disappears when the current time
reaches the reserved time.
A4
The time set in the "sleep" timer can be set with a
time up to the time set with the ON timer. If the end
time of the "sleep" timer is past the time set with the
ON timer, you cannot make that setting.
100
When set to the current
time setting, the reading
blinks for about 3 minutes.