Aztech DSL605EW User Manual page 91

5. Select CoS1 in Class of Service and enter 5 in Priority Bits. Any packet with priority
marking 5 is mapped to CoS1, the highest priority that is normally given to the
voice packets.
6. Click Apply to temporarily the settings.
7. Select CoS2 in the Class of Service and 1 in Priority Bits. Any packet that has a
priority bit of 1 is mapped to CoS2, which is the second highest priority. This is
given to the high priority packets such as video.
8. Click Apply to temporarily activate the settings.
9. Repeat steps 5-7 to add more rules. Up to eight rules can be configured for each
interface.
10. To make changes permanent, click Save Settings.
Notes: Any priority bits that have not been mapped to a CoS default to CoS6, the lowest
priority.
Any WAN interface that is not configured has the default Untrusted mode.
User Manual
Page 91 of 118