Advertisement
Step 6
Power cables
Close the top cover and front cover of
Tips: Please note the power cables and water pipes need to be
well-stored as shown in picture.
Step 8
Connect each VGA cards with
two 8-pin power cables.
Use
D
VGA JACK to safely support the cards. Connect 3 VGA cards together
E
by using the
3-WAY SLI BRIDGE. Close the chassis, turn on the power, and
install OC GURU II and Graphics card driver to get started.
Water pipes
A
WATERCOOLING BOX.
Step 7
C
Insert the
CD-ROM BOX inside the drive bay.
Tips: If the CD-ROM BOX cannot be well-fixed to the chassis,
users may extend the arm of the CD-ROM BOX to strengthen
to structure.
Recommended
Recommended area for VGA JACK
area for VGA JACK
Advertisement
