General Instructions; Operating - Philips 196V3LSB2/00 Service Manual

Meridian 3
8
3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off.
The other control knobs are located at front panel of
the monitor (see figure). By changing these setting,
the picture can be adjusted to your personal
preference.
The power cord should be connected.
Press the power button to turn on the monitor.
The power indicator will light up.
3.2 Control Buttons
Operating the Monitor
Front view product description
1. : Switch monitor's power ON and OFF.
2. :Access the OSD menu.Confirm the OSD
adjustment.
3. : Return to previous OSD level.
4. : Adjust the brightness level.
5. : Adjust the OSD menu.
6. : Adjust the speaker volume.
7. :Automatically adjust the monitor.
Connecting to your PC
AC power input
1
VGA input
2
DVI-D input(Available for selected models)
3
Audio input (available for selected models)
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back of the monitor
firmly.
2. Turn off your computer and unplug its power cable.
3. Connect the monitor signal cable to the video
connector on the back of your computer.
4. Plug the power cord of your computer and your
monitor into a nearby outlet.
5. Turn on your computer and monitor. If the monitor
displays an image, installation is complete.
Install base stand
1. Place the monitor face down on soft and smooth
surface taking care to avoid scratching or
damaging the screen.
2. Attach the base column with the monitor until it
clicks into position.
3. Hold the monitor base stand with both hands and
firmly insert the base stand into the base column.