Samsung ET-WV520 User Manual page 36

The following parameters can be configured:
Enable DHCP Server:
DHCP IP Address Range:
DHCP Lease Time:
Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses
are outside of this range or you may have an IP conflict.
In the DHCP Reservation List a list of DHCP clients, which MAC address that have been locked to specific IP addresses in
the DHCP pool, will be displayed.
In the 'Number of Dynamic DHCP Clients' section, all the active DHCP clients will be displayed.
In the DHCP Reservation section, the user can configure reserved IP address to selective DHCP clients, by entering their
MAC addresses in the list along with the appropriate IP address.
The following parameters can be configured:
Checkbox:
Computer Name:
IP Address:
MAC Address:
S W R
AMSUNG IRELESS OUTER
Check this box to enable the DHCP server on your router. Uncheck to disable this func-
tion.
Enter the starting and ending IP addresses for the DHCP server's IP assignment.
The length of time for the IP address lease. Enter the Lease time in minutes.
Check this box to enable the reservation.
Enter the computer name. Alternatively, select a computer that currently has a DHCP lease
from the drop down menu and click << to automatically populate the Computer Name, IP
Address, and MAC Address fields.
Enter the IP address you want to assign to the computer or device. This IP Address must
be within the DHCP IP Address Range.
Enter the MAC address of the computer or device.
U M
SER ANUAL
P 36
AGE