Advertisement
3.4 Installing the PODZ
1.
Attach the PODZ to the back of the camera and
rotate clockwise until the two dots are aligned.
2.
Slide the latch on the PODZ to lock it.
WARNING: The latch must be locked in place to
ensure the waterproof seal is activated – failure to do so may cause water leakage.
3.5 Recording Videos
Before starting to record, select the video resolution using the Video Resolution
Switch.
There are two methods for starting the video recording function. When the camera
starts recording, there will be a short vibration indicating recording has started. The
LED indicator illuminates RED throughout recording.
1.
Whether the camera power is ON or OFF, simply slide the Recording Slide
Switch
from STOP to REC to start recording.
2.
When your camera is OFF and the Recording Slide Switch
location, press and hold the Power
button to turn the camera ON and it will
start recording.
To stop Recording, move the Recording Slide Switch
from REC to
STOP .The camera will vibrate and the LED indicator will illuminate GREEN to
indicate the recording has stopped. The camera will then enter the Standby mode.
An additional option is to hold the Power
button to stop the recording and turn
the camera off. The camera will vibrate for two seconds and the Red LED light will
turn off.
Notes:
1.
An additional 432x240 (w/ 1080p/720p) or 320x240 (w/ 960p) video file will be
created simultaneously with the recording of an HD/FHD video file. The smaller
video file size allows for more efficient uploading of content to social media
platforms and email.
2.
Changing video resolution is disabled during video recording.
3.
There will be around 1-2 seconds delay before the camera starts recording.
4.
The various video resolution options for HD and FHD can be changed under
the "Settings" selection in the iON software. (see 4.1)
3.6 Taking Photos
1.
Turn on the camera by pressing the Power
button.
2.
After the camera power has been turned on, press the Power
briefly to take a photo. A short vibration and a flash of the green LED indicates
that the action was successful.
Notes:
1.
The Still Photo function is disabled during video recording.
2.
Change photo resolutions and shooting mode (Single Shot, Burst Mode and
Time Lapse) through the "Settings" section on the iON software.
4. Mounting Your Camera
4.1 Secure Strap
1.
Loop one end of the secure strap through
the strap hole of the camera. You may use
a pin to help thread it through the hole.
2.
Attach the other half to the mount.
3.
Clip both ends together when camera is
mounted.
4.2 CamLOCK
iON's versatile CamLOCK Mount System
allows you to attach the camera to any type of
helmet (bike, motorcycle, ski, skydive etc.), pole,
board (surf, skate, ski etc) and handlebar (bike and motorcycle).
Please refer to the specific mounting guides for instructions on how to install your
mounts with your camera for particular activities.
1.
Fit the screw of the CamLOCK to the tripod socket of the camera.
2.
Screw the CamLOCK until it is tight on the camera.
4.3 Mounting on Your Helmet
Before mounting, make sure the surface of the helmet on which the double
faced adhesive will be adhered is clean so that the helmet mount can be
affixed strongly on the helmet.
1.
Loosen the ball joint nut from the helmet mount.
2.
Install the ball joint to the helmet mount and tighten
the nut.
3.
Adhere one side of the double faced adhesive to
the base of the helmet mount, then peel and stick
the other side to the helmet to permanently secure
the mount to the helmet.
4.
Attach the CamLOCK and camera into the
is at REC
CamLOCK socket. Ensure that the ball joint nut is
tightened securely.
Notes:
1.
The CamLOCK system allows you to change the angle of the camera. Simply
loosen the nut, adjust the camera angle and retighten the nut.
2.
You can use the same helmet mount to mount the camera on a motorcycle
helmet by purchasing the other optional mounting kit.
5. iON Software Application
The iON Software Application for Windows or Mac lets you connect to a computer by
USB to:
1. View and copy the files stored on the camera
2. Change the camera settings
3. Set the Date & Time
4. Format the camera's card
5. Link to the iON website and cloud service
6. Check the firmware update
5.1 Windows Software Application
button very
The Windows iON.exe Software Application comes installed on the camera. To run
the application:
1. Insert a MicroSD card with at least 2MB free space into the camera.
2. Press the Power button to turn the camera on.
3. Connect your camera to the PC via the camera's USB cable.
4. Open the MicroSD folder and you will find the file "iON.exe".
5. Double click the file to open
5.2 Mac Software Application
1. Visit the ion website (www.iontheaction.com) to download the latest Mac software
application version.
2. Insert a MicroSD card with at least 2MB free space into the camera.
3. Press the Power button to turn the camera on.
4. Connect your camera to the Mac via the camera's USB cable.
4. Use Finder to locate and open the camera as a new device usually called "No
Name". You should see a folder "DCIM" and the file iON.exe when you open it.
6. Drag the downloaded file to the new device and put it with DCIM and iON.exe.
7. Double click the newly loaded file to run the Mac Application. The application will
not run if it is not in on the camera's card.
Notes:
The camera can be connected to any plug & play Windows or Mac system and
accessed as a removable disk drive. Files can be viewed and copied without the use
of the application.
6. Signing Up for Free iON Cloud Storage
You can sign up for your 8GB of free Cloud storage simply go to
www.iontheaction.com/ioncloud and follow the steps. The iON Cloud is a great way
to store and share your photos and video footage for free.
7. Connecting Your Camera to a HDTV
You can connect your camera to a HDTV with an HDMI cable (not included). Once it
is connected you can:
1. Take photos or videos by using your HDTV as a viewfinder
2. Playback any photo or video files saved in your camera
3. Delete any files saved on the camera
4. Format the MicroSD Card
8. Air Pro 2 Wi-Fi (this section applies to Air Pro 2
WiFi model or optional WiFi PODZ accessory
ONLY)
A Wi-Fi PODZ turns your iON Air Pro 2 into a Wi-Fi access point. View the camera's
videos/photos and change camera settings from your mobile phone, tablet or
computer. Transfer files back to your computer or mobile device. You can also
live-stream the camera view, start/stop recording or take a photo.
8.1 Air Pro 2 WiFi Package Content
In addition to the package contents of Air Pro 2 (Refer to section 1), the Air Pro 2
Wi-Fi has included a Wi-Fi PODZ for performing the Wi-Fi functionality.
Wi-Fi PODZ
Rotate to seal the camera.
8.2 Wi-Fi PODZ Functional Parts
In addition to the functional parts of Air Pro 2(Refer to items 1 to11 in section 2), Air
Pro 2 Wi-Fi has additional functional parts on the Wi-Fi PODZ.
12
Wi-Fi PODZ
Rotate to seal the camera
13
Wi-Fi LED indicator
Shows the Wi-Fi status
14
Wi-Fi Power button
Turns the Wi-Fi on or off
15
PODZ Latch
Locks the PODZ
Advertisement
